Abstract:The thermophysical properties of dense ZrB2-20 vol% SiC ceramics (ZS) with and without doping of 5 vol % WC (ZSW) were characterized up to 1800 degrees C. Because of the in-situ formed WB with low thermal conductivity and the strong phonon scattering effect from (Zr,W)B-2 solid solution, the thermal conductivity of ZSW (36.2 W/(m K)) at room temperature is much lower than that of ZS (100.4 W/(m K)), however, their differences at 1800 degrees C is very limited (42.2 W/(m K) for ZSW and 47.4 W/(m . K) for ZS). The detailed calculation indicates that contributions from lattice vibrations on the thermal conductivity decreased to nearly zero at 1800 degrees C in both samples, therefore, electrical conductivity of ZS and ZSW dominates their thermal transport behavior at higher temperatures. Furthermore, amorphous phase with compositions of Ca-Al-Si-O was occasionally found at the triple junction of ZS, its softening and rewetting of the grain boundary at higher temperature were confirmed from the internal friction curve and microstructural characterization at different levels, which was thought to be responsible for the tremendous increase of Interfacial thermal resistance and continuous drop of thermal conductivity of ZS up to 1800 degrees C. On the contrary, benefiting from the clean boundary and tight triple junction in ZSW, its thermal conductivity can stabilize between 36 and 47 W/(m K) in a broad temperature range from 25 to 1800 degrees C. Based on the measurement above, the type of carriers and thermoelectric figure of merit (zT) in ZrB2-SiC based ceramics are also firstly reported. (C) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Thermal Stability of Bulk Zr2Al4C5 Ceramic at Elevated Temperatures

Microstructure and mechanical properties of Zr3Al3C5-based ceramics synthesized by Al-Si melt infiltration

Phase transformation of Y-Ce-TZP/Al2O3 composite ceramic annealed in air

Effect of thermal treatment at high temperature on phase stability and transformation of Yb2O3 and Y2O3 co-doped ZrO2 ceramics

Effect of Al2O3 on the Phase Stability of Y-Ce-TZP/Al2O3 Composites at Low Temperature

Mechanical Properties Durability of Sc2O3-Y2O3 Co-Stabilized ZrO2 Thermal Barrier Materials for High Temperature Application

Mechanical and thermal properties of Al 2O 3-ZrO 2 composite ceramics at cryogenic temperatures

RETRACTED: Phase Transition and Thermal Expansion of the LaAlO3 Single Crystal at High Temperatures

The Effect of Al2O3 on the Thermal Stability and Mechanical Properties of 3Y-TZP

Thermal and mechanical properties of Sc2O3–CeO2 co-stabilized zirconia ceramic as promising thermal barrier coating material

Effect of Ce–Zr Mixed Oxides on the Thermal Stability of Transition Aluminas at Elevated Temperature

Thermophysical and mechanical properties of cubic, tetragonal and monoclinic ZrO2

Isothermal Oxidation of Zr2[Al(Si)]4C5–SiC Composites at 1000–1300°C in Air

Phase composition, microstructure, and properties of Al4O4C–(Al2OC)1-(AlN) –Zr2Al3C4–Al2O3 refractories prepared at high temperatures in nitrogen

Phase development in metal-dropped silicon oxycarbides under water vapor and argon hybrid atmosphere

Thermal and Electrical Transport in ZrB2-SiC-WC Ceramics Up to 1800 °C

Phase evolution, thermophysical and mechanical properties of high-entropy (Ce0.2Nd0.2Sm0.2Eu0.2Yb0.2)2Zr2O7 ceramic for advanced thermal barrier coatings

Thermodynamic analysis of Al O (g) and phase and micro-structure evolution of the resin bonded Al–Al2O3–ZrO2 refractories under air embedded in coke breeze

Phase Composition and Stability, Sintering and Thermal Conductivity of Gd2O3 and Yb2O3 Co-Doped YSZ

Phase relationship of the Ag–Zr–Cr system at 1000 and 750°C

Effect of Zr2Al4C5 Content on the Mechanical Properties and Oxidation Behavior of ZrB2-SiC-Zr2Al4C5 Ceramics