Abstract:AlxNb0.5TiV2Zr0.5 (x = 0, 0.2, 0.4, 0.6, 0.8, 1.0) refractory high entropy alloys were prepared by vacuum arc melting to obtain a lightweight REHA with excellent microstructure and mechanical properties. The microstructure, density, hardness, and compressive properties at room and elevated temperatures of AlxNb0.5TiV2Zr0.5 alloys were investigated. All AlxNb0.5TiV2Zr0.5 alloys are composed of the BCC phase and the C14-Laves phase, and the volume fraction of the Laves phase raises from 12.03% to 22.83% and then decreases slightly to 20.31% with the increase of Al content. The density of AlxNb0.5TiV2Zr0.5 alloys decreases with the increase of Al content from 6.12 g/cm3 to 5.43 g/cm3, and the microhardness increases from 397.2 HV to 641.9 HV. At room temperature, the yield strength of AlxNb0.5TiV2Zr0.5 alloys increases obviously at first and then decreases slightly with the range of 843 MPa–1727 MPa. The compressive strain of the alloys obviously decreases from 33.4% to 13.7% at first and then increases to 16.6%. Upon increasing the temperature to 873 and 1073 K, the strength of all alloys decreases, and the yield strength of the Al0.8 alloy remains 1569 and 1108 MPa, respectively. The compression ratios of all AlxNb0.5TiV2Zr0.5 alloys reach 50% without fracture at this temperature. The specific yield strength of Al0.8 alloy acheives 312 × 103, 284 × 103, and 199 × 103 MPa·cm3g-1 at 298, 873, and 1073 K, which is superior to that of other alloys. A strong correlation between the mechanical properties and the Al content of AlxNb0.5TiV2Zr0.5 alloys is observed. Al is one of the elements that can promote the formation of the Laves phase, and the volume fraction of the Laves phase increases with the increasing Al content. As a hard intermetallic compound phase, the mechanical properties of the alloys are improved with the increasing volume fraction of the Laves phase.

Phase composition, microstructure, and properties of Al4O4C–(Al2OC)1-(AlN) –Zr2Al3C4–Al2O3 refractories prepared at high temperatures in nitrogen

The phase composition and microstructural evolution of a novel MgO-C-Al-Si refractory used in bottom-blowing elements at high temperatures in flowing nitrogen

Thermodynamic analysis of Al O (g) and phase and micro-structure evolution of the resin bonded Al–Al2O3–ZrO2 refractories under air embedded in coke breeze

Evolution of c-ZrN nanopowders in low-carbon MgO–C refractories and their properties

High-temperature performance in Al2O3–Cr2O3 refractories: Effect of Al2TiO5

Fabrication of novel AlN-SiC-C refractories by nitrogen gas-pressure sintering of Al4SiC4

Characteristic and function of the dynamic Al-AlN core-shell structure in Al-Al 2 O 3 composite at elevated temperature

Enhanced oxidation resistance and thermal shock resistance of low-carbon Al 2 O 3 –C refractories with nano-BN: A synergistic of mullitization behavior

Phase Formation and Thermodynamic Analysis of Self-propagating High-temperature Synthesis Al–Zr–N System Composites

Microstructure, phase evolution, mechanical properties and slag corrosion resistance of ZrO2 reinforced Al2O3–Cr2O3 composites

Effects of Cr2O3 Content on Microstructure and Mechanical Properties of Al2O3 Matrix Composites

Effect of Al on microstructure and mechanical properties of lightweight AlxNb0.5TiV2Zr0.5 refractory high entropy alloys

SiC and ZrN Nano-Particulate Reinforced AlON Composites: Preparation, Mechanical Properties and Toughening Mechanisms

Microstructure and tribological properties of TiZrV0.5Nb0.5Al refractory high entropy alloys at elevated temperature

Thermal Stability of Bulk Zr2Al4C5 Ceramic at Elevated Temperatures

The high-temperature oxidation and mechanical properties of the Cr/Zr and CrN/Zr coating

Study on the stability of different refractories during the melting process of a K4169 Ni-based superalloy

A novel nano-structured zirconium alloy prospective for high temperature applications

Mechanical High-Temperature Properties and Damage Behavior of Coarse-Grained Alumina Refractory Metal Composites

Investigation on the Microstructure and High-Temperature Properties of AlN Coating Through Oxygen Addition

In-situ formation of plate-like Al4O4C and MWCNTs in Al2O3–C refractories with Al4SiC4 additives