Abstract:Two compositions Ce0.50Zr0.39La0.04Y0.07O2−δ and Ce0.25Zr0.65La0.04Y0.06O2−δ based on ceria-zirconia solid solutions were prepared as nanopowders using a continuous hydrothermal flow synthesis reactor, followed by either freeze-drying or hotplate-drying of the slurry. Each dried nanopowder was then subjected to 10h heat-treatment at 1000°C, 1100°C or 1200°C in air (to simulate accelerated ageing). The reducibility and hydrogen consumption of the oxidised samples were measured using temperature programmed reduction (TPR) up to 1000°C. The effects of composition, drying method and heat-treatment temperature were evaluated on the TPR profiles of the materials. The powders were further investigated using a range of analytical methods including UV/Vis spectroscopy (which yielded colour data), Raman spectroscopy, powder X-ray diffraction, BET surface area measurements and X-ray photoelectron spectroscopy (XPS). Chemometric methods were used to investigate relationships between the spectroscopic and total oxygen storage capacity (OSC) data. Principal component analysis (PCA) was used to provide a simple interpretation of the effects of various synthesis and treatment parameters on Raman spectra. Principal component regression (PCR) was used to build regression models relating the Raman spectra and the temperature of hydrogen consumption peak at several set temperatures in the TPR. The total hydrogen consumption of the materials was generally high, while the drying and heat-treatment conditions appeared to have a significant effect on the final properties of the resulting powders, such as the surface area and total oxygen storage capacity.

The Study on Degradation of Y<sub>2</sub>O<sub>3</sub>-CeO<sub>2</sub>-Partially Stabilized ZrO<sub>2</sub> Adding Al<sub>2</sub>O<sub>3</sub> Particles at Low Temperature

Effect of Al2O3 on the Phase Stability of Y-Ce-TZP/Al2O3 Composites at Low Temperature

Effect of Al2O3 on Degradation of 3Y-TZP Ceramics at Low Temperature

[Study on Low Temperature Degradation of Dental Zirconia Ceramic].

The Effect of Al2O3 on the Thermal Stability and Mechanical Properties of 3Y-TZP

Mechanical properties and low temperature degradation (LTD) of cation-stabilized zirconia

Degradation of zirconia in moisture

Influence of a small amount of Al2O3 addition on the transformation of Y2O3-partially stabilized ZrO2 during annealing

Resistance to Low‐Temperature Degradation of Equimolar YO1.5–TaO2.5 Stabilized Tetragonal ZrO2 Ceramics in Air

X‐ray Photoelectron Spectroscopy Investigation on the Low‐Temperature Degradation of 2 Mol% Y2O3‐ZrO2 Ceramics

Role of t-ZrO2 stabilization methods in phase composition, structure and properties of ZTA ceramics

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Effect of Ce–Zr Mixed Oxides on the Thermal Stability of Transition Aluminas at Elevated Temperature

Effects Of Sintering Temperature On Degradation Of Al2o3-Y-Ce-Tzp Ceramics At Low Temperature

Phase transformation of Y-Ce-TZP/Al2O3 composite ceramic annealed in air

The effect of additives on the properties of ZrO2 stabilized with calcia and magnesia

Microstructural dependence of aging induced phase transformation in Y2O3 partially stabilized ZrO2 polycrystals

Raman and X-ray photoelectron spectroscopic characterizations of thermal stability of 3 mol% yttria stabilized zirconia ceramics

Evaluation of Feasibility on Dental Zirconia-Accelerated Aging Test by Chemical Immersion Method

Improving the Comprehensive Properties of ZrO2–C Materials with Aid of TiO2 Addition

The Effect of the Additive to the Thermal Shock Resistance of Zirconia