Abstract:OBJECTIVE:To evaluate the properties of low temperature degradation (LTD) of dental Y-TZP by experiments.METHODS:According to ISO 13356-2008 standards, 72 blanks of Y-TZP were sintered at different temperature (1 400 °C,1 450 °Cor 1 530 °C) and in different heat preserving time(2 h or 5 h), and then the specimens were grounded and polished. The blanks were divided into 12 groups according to the different sintering temperature, heat preserving time and aging time. The surface of specimens was observed by SEM to evaluate the grain size of specimens; Each group of specimens was exposed to 140 °C hydrothermal aging environment for 0 h, 5 h or 24 h. After aging, XRD analysis was undertaken to determine the amount of phase transformation from tetragonal to monoclinic for each groups. At last, the biaxial flexural strengths of all specimens were measured and calculated.RESULTS:The SEM showed that the grain size of each group of Y-TZP increased with the increase of sintering temperature and heat preserving time, however, all of them were below 1 μm. The XRD analysis showed the contents of monoclinic of each group varied with different sintering temperatures, heat preserving times and aging time. The flexural strength of 24 h aging groups declined significantly; but that of 5 h aging group showed increase or decrease according to the different sintering temperatures and heat preserving times.CONCLUSION:Different sintering procedures to some extent may affect the Y-TZP aging properties.

Resistance to Low‐Temperature Degradation of Equimolar YO1.5–TaO2.5 Stabilized Tetragonal ZrO2 Ceramics in Air

[Study on Low Temperature Degradation of Dental Zirconia Ceramic].

Low Thermal Conductivity Without Oxygen Vacancies in Equimolar YO1.5 + TaO2.5- and YbO1.5 + TaO2.5-stabilized Tetragonal Zirconia Ceramics

Low Temperature Aging Effects of Y_2O_3 Stabilized Tetragonal Zirconia Polycrystals Ceramics in Acidic Environment

Effects of Low Temperature Degradation on Zirconia Ceramic(px-242A)

Effect of thermal treatment at high temperature on phase stability and transformation of Yb2O3 and Y2O3 co-doped ZrO2 ceramics

Mechanical Properties Durability of Sc2O3-Y2O3 Co-Stabilized ZrO2 Thermal Barrier Materials for High Temperature Application

High Temperature Mechanical Properties of Zirconia Metastable T '-Phase Degraded Yttria Stabilized Zirconia

The Study on Degradation of Y<sub>2</sub>O<sub>3</sub>-CeO<sub>2</sub>-Partially Stabilized ZrO<sub>2</sub> Adding Al<sub>2</sub>O<sub>3</sub> Particles at Low Temperature

Mechanical properties and low temperature degradation (LTD) of cation-stabilized zirconia

Effect of Al2O3 on Degradation of 3Y-TZP Ceramics at Low Temperature

X‐ray Photoelectron Spectroscopy Investigation on the Low‐Temperature Degradation of 2 Mol% Y2O3‐ZrO2 Ceramics

Raman and X-ray photoelectron spectroscopic characterizations of thermal stability of 3 mol% yttria stabilized zirconia ceramics

Effect of Al2O3 on the Phase Stability of Y-Ce-TZP/Al2O3 Composites at Low Temperature

Low Thermal Conductivity of SnO2‐Doped Y2O3‐Stabilized ZrO2: Effect of the Lattice Tetragonal Distortion

Thermochemical compatibility between La2(Ce1-xZrx)2O7 and 4 mol% Y2O3 stabilized zirconia after high temperature heat treatment

Phase Stability and Thermal Expansion Property of ZrO2–NdO1.5–AlO1.5 Ceramics from 50 to 1550 °C

The Effect of Al2O3 on the Thermal Stability and Mechanical Properties of 3Y-TZP

Thermochemical compatibility between La<sub>2</sub>(Ce<sub>1-x</sub>Zr<sub>x</sub>)<sub>2</sub>O<sub>7</sub> and 4 mol% Y<sub>2</sub>O<sub>3</sub> stabilized zirconia after high temperature heat treatment

Phase transformation of Y-Ce-TZP/Al2O3 composite ceramic annealed in air

Premature Failure Induced by Non-Equilibrium Grain-Boundary Tantalum Segregation in Air-Plasma Sprayed ZrO2−YO1.5−TaO2.5 Thermal Barrier Coatings