Abstract:Enhancing the thermal shock resistance of Y2O3 ceramic crucibles, coupled with advancements in melting and casting technologies to reduce the adverse influence of interfacial reactions, is essential for producing low-energy consumption, high-quality titanium-aluminum (TiAl) alloys. In this study, the Y2O3 ceramic crucible with good thermal shock resistance was developed through the optimization of particle size distribution and sintering holding time. The interaction mechanisms between Y2O3 ceramics and TiAl alloys under extreme conditions were investigated, and strategies for enhancing the mechanical properties of TiAl alloys through the integration of Y2O3 crucibles with centrifugal casting were discussed. The results indicated that introducing large particles of 1-3 mm under sintering conditions of 2023 K and 6 h effectively enhances the thermal shock resistance of Y2O3 crucible. The interaction between Y2O3 and TiAl alloys primarily involved physical erosion (spalling/dispersion), dissolution of separated particles, and surface modification of interface layer particles (reaction). Physical erosion played an important role in this dynamic interaction, with the extent of erosion intensifying through continuous use of the crucible, while electromagnetic forces ensured the uniform distribution of inclusions within the TiAl alloy matrix. Moreover, the application of centrifugal casting technology substantially refines the grain size and reduces the inclusion count, thereby significantly enhancing the mechanical properties of TiAl alloy.

Effect of surface brittle-to-ductile transition on high-temperature thermal shock resistance of Al2O3 ceramics

Thermal Shock Behavior of Al2O3/TiO2-NiCrBSi Graded Thermal Barrier Coatings Produced by Flame Spraying

Effect of Trace Boron Addition on the Microstructural Evolution and Mechanical Properties in Ti45al8nb2cr-B Alloys

Failure Mechanisms of Al2O3 with Different Glass Phase Content at Cryogenic Temperatures

Brittle-to-ductile transition and high-temperature deformation in ZrO2(Y2O3) and Al2O3 ceramics as evaluated by small punch test

Brittle-to-Ductile Transition and High-Temperature Deformation in ZrO<SUB>2</SUB>(Y<SUB>2</SUB>O<SUB>3</SUB>) and Al<SUB>2</SUB>O<SUB>3</SUB> Ceramics as Evaluated by Small Punch Test

Low temperature sintering behavior of B2O3 vapor in BaTiO3-based PTCR thermistors

On revealing the mechanisms involved in brittle-to-ductile transition of fracture behaviors for γ-TiAl alloy under dynamic conditions

Thermal shock damage assessment of a BNW/SiO2 ceramic: Insight from temperature-dependent material properties

High-temperature performance in Al2O3–Cr2O3 refractories: Effect of Al2TiO5

Crack Arrest in Brittle Ceramics Subjected to Thermal Shock and Ablation

Mechanical properties and fracture behavior of ultrahigh temperature ceramics at ultrahigh temperatures

Research of Mechanical and Thermal Properties of Al2O3 at Cryogenic Temperatures

Mechanical and thermal properties of Al 2O 3-ZrO 2 composite ceramics at cryogenic temperatures

Sintering behavior and thermal shock resistance of aluminum titanate (Al2TiO5)-toughened MgO-based ceramics

Thermal durability of aluminum titanate-mullite composites with high thermal shock resistance

Effects of annealing temperature on the microstructure, mechanical and tribological properties of CrAlTiN coatings

The Study on Interaction Mechanisms Between Ti48al2cr2nb Alloy and Y2o3 Ceramic Crucibles with Good Thermal Shock Resistance: Assessing a Novel, Cost-Effective Approach to the Preparation of High-Performance Tial Alloys

Effect of Heat Treatment at 900 °C on Microstructural and Mechanical Properties of Thermal Barrier Coatings

Nanoscale brittle-to-ductile transition of the C15 CaAl$_2$ Laves phase

Microstructure Evolution and Mechanical Behaviors of Alumina-Based Ceramic Shell for Directional Solidification of Turbine Blades