Abstract:The high temperature tensile test of Ti-47.5Al-2.5 V-1.0Cr-0.2Zr alloy was carried out by electronic universal testing machine under the condition of 750–900 °C/10 −5 –10 −3 s −1 . The hot tensile stress-strain curves were analyzed, and the constitutive model under hot tensile conditions was established. The microstructure transformation rule and deformation mechanism during tensile process were determined. The results show that the hot tensile curve is longer in the steady-state flow stage corresponding to lower strain rate and higher tensile temperature, the true stress declines and the elongation at break increases. The constitutive equation was established based on the tensile curve data, and the corresponding thermal activation energy was 310.3 kJ/mol. As the rise of tensile temperature and the decline of strain rate, the proportion about cross-layer fracture in the tensile fracture morphology decreases, the number of dimples increases, more lamellar structures change into recrystallized structures, and the softening effect of the alloy is more obvious. The dislocation deformation mechanism mainly includes the existence of dislocation slip and climb, dislocation intersection and dislocation ring or dislocation network formation. Twinning deformation is also another important mechanism of high temperature tensile deformation of TiAl alloy. Twins are formed in parallel with each other, so that the deformation can be further carried out. The dislocations and twins in the deformed microstructure will provide nucleation conditions for recrystallized grains. The dynamic recrystallization(DRX) grains are preferentially formed around the grain boundary and the vicinity of dislocation and twin is also preferred nucleation site for DRX. The DRX behavior is the main softening mechanism, and DRX size and volume fraction corresponding to lower tensile rate and higher tensile temperature are larger.

On revealing the mechanisms involved in brittle-to-ductile transition of fracture behaviors for γ-TiAl alloy under dynamic conditions

Dynamic behavior and fracture mode of TiAl intermetallics with different microstructures at elevated temperatures

Microstructure evolution of a forged TiAl-Nb alloy during high-temperature tensile testing

A Study on the Brittle-to-Ductile Transition Temperature of Forged Β-Solidifying TiAlMn and TNM Alloys

Investigation on the microstructure evolution and dynamic recrystallization mechanisms of TiAl alloy at elevated temperature

Anomalous Increase of Fracture Toughness of TiAl-based Alloys at High Temperature

Hot Deformation Behavior and Dynamic Recrystallization of a Β-Solidifying TiAl Alloy

Experimental Study of Ti-46.5Al-2Nb-2Cr with Three Different Microstructures under Elevated Temperatures and High Strain Rate

Dynamic tensile properties of Ti-47Al-2Mn-2Nb-0.8TiB2 alloy

An Investigation on Dynamic Tensile Properties of TiAl Intermetallic Alloy

Γ-Phase Transformation, Dynamic Recrystallization and Texture of a Forged TiAl-based Alloy Based on Plane Strain Compression at Elevated Temperature

Tensile impact behavior of duplex Ti-46.5Al-2Nb-2Cr at elevated temperatures

Microstructure evolvement of isometry TiAl under tensile impact loadings

Microstructure Evolution of Near Gamma TiAl Intermetallic under Tensile Impact Loadings at High Temperatures

DISCONTINUOUS YIELDING BEHAVIOR OF Β PHASE CONTAINING TiAl ALLOY DURING HIGHTEMPERATURE DEFORMATION PROCESS

The mechanism for annealing-induced ductile to brittle transition in a high-temperature titanium alloy and its mitigation

Study on high temperature tensile constitutive behavior and deformation mechanism of Ti-47.5Al-2.5 V-1.0Cr-0.2Zr alloy

Tensile mechanical behavior of TiAl(FL) at high strain rate

Microstructural characteristics and dynamic recrystallization behavior of β-γ TiAl based alloy during high temperature deformation

The characteristics and mechanisms of creep brittle-ductile transition in TiAl alloys

Temperature-dependent Mechanical Properties and Fracture Behavior of Directionally Solidified Ti47Al2Cr2Nb Alloy