Abstract:The sinterability,densification mechanism and thermal conductivity of three types of AlN powders with different mor-phologies were investigated by spark plasma sintering （SPS）. The three types of AlN powders were：AlN powders fabricated by combustion synthesis （CS） with nanowhisker-like and irregular particle morphologies and AlN powder fabricated by carbothermic reduc-tion nitridation （CRN） with submicron equiaxed particle morphology. The results indicate that the nanowhisker-like AlN powder has similar excellent sinterability compared with the submicron powder. Both of them can be sintered densely at 1 600 ℃ without sinter-ing aids. The densification of CS type AlN powders is caused by a decompose-recrystallization-agglomeration mechanism due to their high chemical activity and the effect of plasma activation. Therefore,the grain boundary is naturally with high strength,which made the fracture predominated by transgranular. However,the densification of CRN type AlN powder is by a surface diffusion mechanism because the AlON phase formed at the grain boundary. Thus,the strength of the grain boundary is low,and the fracture is predominated by intergranular. The thermal conductivity of AlN bulk strongly depends on the oxygen content of raw AlN powder. Because of the higher oxygen content of the CS type AlN powders compared to the CRN type AlN powder,the thermal conductivity of the ceramics by CS type AlN is lower.

Effect of Sm2O3 Content on Microstructure and Thermal Conductivity of Spark Plasma Sintered AlN Ceramics

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Microstructure and Thermal Conductivity of Spark Plasma Sintering AlN Ceramics

Structure and Properties of Aln Ceramics Prepared with Spark Plasma Sintering of Ultra-Fine Powders

Fabrication and thermal conductivity of AlN/BN ceramics by spark plasma sintering

SPARK PLASMA SINTERING OF AlN POWDERS OBTAINED FROM COMBUSTION SYNTHESIS AND THEIR THERMAL CONDUCTIVITY

Effects of Y2O3 and Yttrium Aluminates As Sintering Additives on the Thermal Conductivity of AlN Ceramic Substrates

Low-Temperature Sintering of AlN Ceramics by Sm 2 O 3 -Y 2 O 3 -Cao Sintering Additives Formed Via Decomposition of Nitrate Solutions

Study on Thermal Conductivity of Spark-Plasma-Sintered Silicon Nitride Ceramics

Effect of Sintering Temperature and Yttrium Composition on the Densification, Microstructure and Mechanical Properties of Spark Plasma Sintered Silicon Nitride Ceramics with Al2O3 and Y2O3 Additives

Effect of Y2O3 on low temperature sintering and thermal conductivity of AlN ceramics

Effect of Multi-Sintering Additive MgO-Al2O3-CeO2 on Densification and Properties of Silicon Nitride Ceramics by Spark Plasma Sintering

Effect of Additive Sm2O3 on Synthesizing AlN Ceramics at High Pressure

Effects of AlN Content and Sintering Atmospheres on the Thermal Conductivity of Hot-Pressed SiC Ceramics

Sintering of β-Si_3N_4 Powder and Thermal Conductivity of the Ceramic

Microstructure and thermal conductivity of AlN ceramics with ultra-fine Y2O3 powder addition

Phase composition, microstructure, electrical and thermal properties of TiN and Yb2O3-Sm2O3 doped AlN ceramics

Effects of Li2o on the Low Temperature Sintering and Thermal Conductivity of Aln Ceramics

Effect Of Aln Content On The Pressureless Sintering Behaviors Of Sic-Aln Multiphase Ceramics

Effect of Spark Plasma Sintering Temperature on the Microstructure and Thermophysical Properties of High-Silicon–Aluminum Composites