Abstract:Aluminum nitride/polyphenylene sulfide (AlN/PPS) composites were prepared using a melt-blended method, and the thermal, mechanical, morphology, and dielectric properties of the composites were systematically investigated. The results showed that the thermal conductivity of AlN/PPS composites increased with the addition of AlN, in various amounts, by forming a conductive network in the composites due to the filler. Wide-angle X-ray diffraction and scanning electron micrograph/energy dispersive spectrometry were employed to investigate the effects of AlN addition on the crystal property of the matrix. The test results showed that the crystallinity of the PPS increased with higher AlN content at first, and dropped when the volume content of AlN was over 15 vol%, that is because the AlN filler provided a heterogeneous nucleation effect on the PPS. Several thermal conductivity models were applied to predicate the thermal conductivity of AlN/PPS composites. The mechanical tests showed that the impact and flexural strength of the composites initially increased and decreased as the AlN contents increased. Thermogravimetric analyses showed that the thermal stability of PPS increased with the addition of AlN. The thermal conductivity of AlN/PPS composites was tested at different temperatures and it was found that by increases in temperature the thermal conductivity of the composites decreased. The electrical properties of the composites were also investigated.

SPARK PLASMA SINTERING OF AlN POWDERS OBTAINED FROM COMBUSTION SYNTHESIS AND THEIR THERMAL CONDUCTIVITY

Microstructure and Thermal Conductivity of Spark Plasma Sintering AlN Ceramics

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Structure and Properties of Aln Ceramics Prepared with Spark Plasma Sintering of Ultra-Fine Powders

Fabrication and thermal conductivity of AlN/BN ceramics by spark plasma sintering

Study on Thermal Conductivity of Spark-Plasma-Sintered Silicon Nitride Ceramics

Sintering of β-Si_3N_4 Powder and Thermal Conductivity of the Ceramic

Mechanical and Electrical Properties of Carbon Nanofibers Reinforced Aluminum Nitride Composites Prepared by Plasma Activated Sintering

Properties And Microstructure Of Pure Al Powder Compacts Using Spark Plasma Sintering

Spark Plasma Sintering of Gas Atomized AlNiYLaCo Amorphous Powders

Spark Plasma Sintering of AlN/Al Functionally Graded Materials

Effects of AlN Content and Sintering Atmospheres on the Thermal Conductivity of Hot-Pressed SiC Ceramics

Sintering of beta-Si3N4 Powder and Thermal Conductivity of the Ceramic

The Microstructure and Thermal Diffusivity of Carbon Nanostructures/Si3n4 Composites Processed Using Spark Plasma Sintering

Investigation on Mechanical Properties of AlON Ceramics Synthesized by Spark Plasma Sintering

Crystallization of Polyphenylene Sulfide Reinforced with Aluminum Nitride Composite: Effects on Thermal and Mechanical Properties of the Composite

Cu/AlN composite and functionally graded materials with high strength and high electrical- and thermal-conductivity fabricated by spark plasma sintering

Spark plasma sintering and mechanical properties of Al_2O_3-ZrO_2 nanocomposites

Cu-Al-Ni Nanocrystalline Compacts Obtained by Spark Plasma Sintering of Mechanically Alloyed Powders

SiC-Al_2O_3 Nanocomposites Superfast Densified by SPS