Abstract:The effect of implantation temperature on the migration behaviour of xenon (Xe) implanted into glassy carbon and the effect of annealing on radiation damage retained by ion implantation were investigated. Glassy carbon substrates were implanted with 320 keV Xe + to a fluence of 2 × 10 16 cm -2 . The implantation process was performed at room temperature (RT) and 100 °C Some of the as-implanted samples were isochronally annealed in vacuum at temperatures ranging from 300 °C to 700 °C in steps of 100 °C for 10 h. The as-implanted and annealed samples were characterized using Rutherford backscattering spectrometry (RBS) and Raman spectroscopy. The RT implanted depth profiles indicated that the migration of Xe towards the surface of glassy carbon was accompanied by a loss of Xe ions. The samples implanted at 100 °C indicated no diffusion or loss of Xe after annealing at 300 °C. However, annealing at temperatures ranging from 400 °C to 700 °C resulted in a slight shift in the Xe profile tail-end towards the bulk of glassy carbon. The diffusion coefficients ( D ) in the temperature range of 300 °C–700 °C for the RT and 100 °C implanted samples, activation energies ( E a ), and pre-exponential factors ( D o ), were extracted. The values of D ranged from (9.72 ± 0.48) × 10 -21 to (1.87 ± 0.09) × 10 -20 m 2 /s with an activation energy of (6.25 ± 0.31) × 10 -5 eV for RT implanted samples, and the samples implanted at 100 °C, D ranged from (3.85 ± 0.19) × 10 -21 to (6.96 ± 0.34) × 10 -20 m 2 /s with activation energy of (4.10 ± 0.02) × 10 -5 eV. The Raman analysis revealed that implantation at the RT amorphised the glassy carbon structure while the samples implanted at 100 °C showed mild damage compared to RT implantation. Annealing of the RT-implanted sample resulted in some recovery of the damaged region as a function of increasing annealing temperature.

EFFECTS OF ION-IMPLANTATION ON THE ANNEALING BEHAVIOR OF AMORPHOUS-GERMANIUM AND GOLD BILAYERS

Study of Surface Morphology in GaAs by Hydrogen and Helium Implantation at Elevated Temperature

A Study of Diffusion, Clustering and Defects in As+ and Bf2+ Implanted Silicon During Scanning Electron Beam Annealing.

Annealing effects of In2O3 thin films on electrical properties and application in thin film transistors

Effect of Low-Energy Implantation of In+ Ions on the Composition and Electronic Structure of Single-Crystal GaP(111)

Isochronal and Isothermal Annealing Effects on Si1-xGex Thin Film by Ion Beam Sputtering

Quantum-Well Intermixing For Optoelectronic Integration Using High-Energy Ion-Implantation

Influence of Post-Annealing Treatment on the Morphology of Au Films Deposited on Liquid Surfaces

Fractal Structure Appeared in Ion-Implanted A-Ge/ag Bilayer Films after Annealing

ENHANCING THE PHOTOLUMINESCENCE OF InAsP/InP STRAINED MULTIPLE QUANTUM WELLS BY H+ IONS IMPLANTATION

Change in the surface state of the single-crystal germanium as a result of implantation with silver ions and annealing with light pulses

On the Formation of Solid State Crystallized Intrinsic Polycrystalline Germanium Thin Films

Molecular Dynamics Study of the Tensile Properties of Gold Nanocrystalline Films Irradiated by Gallium Ions

Effects of Self-Ion Implantation on the Thermal Growth of He-Induced Cavities in Silicon

Study of the effect of implantation temperature on the migration behaviour of Xe implanted into glassy carbon

Effects of Si-ion implantation on crystallization behavior of Ge 2 Sb 2 Te 5 film

Swelling or Erosion on the Surface of Patterned Gan Damaged by Heavy Ion Implantation

Impact of post-ion implantation annealing on Se-hyperdoped Ge

Damage Evolution in Gan under Mev Heavy Ion Implantation

Effects Of Ion Irradiation On Mechanical Property Of Zr50.7cu28ni9al12.3 Amorphous Alloy

Annealing of focused ion beam damage in gold microcrystals: An in situ Bragg coherent X-ray diffraction imaging study