Abstract:Surface modification of Ar plasma-pretreated SiLK film coating on a (100)-oriented silicon wafer (SiLK-Si substrate) via UV-induced graft copolymerization with 4-vinylpyridine (the 4VP-g-SiLK-Si surface) or 1-vinylimidazole (the VIDz-g-SiLK-Si surface! was carried out to promote the adhesion with the electrolessly deposited copper. The surface composition of the graft-copolymerized SiLK-Si substrates was characterized by X-ray photoelectron spectroscopy. The topography of the 4VP-g- SiLK-Si and VIDz-g-SiLK-Si surfaces was investigated by atomic force microscopy. The 4VP-g- SiLK-Si and VIDz-g-SiLK-Si surfaces could be activated by PdCl2 in the absence of prior sensitization by SnCl2 (the Sn-free activation process! for the subsequent electroless deposition of copper. The 180degrees-peel adhesion strength of the electrolessly deposited copper on the 4VP-g- SiLK-Si and VIDz-g-SiLK-Si surfaces reaches about 6 and 5 N/cm, respectively. These adhesion strength values were much higher than those of the electrolessly deposited copper on the pristine and Ar plasma-treated SiLK-Si surfaces. The strong adhesion of the electrolessly deposited copper to the VIDz-g-SiLK-Si and 4VP-g- SiLK-Si surfaces was attributed to the synergistic effect of the strong interaction between the pyridine or imidazole functional groups of the grafted polymers with copper atoms, the spatial distribution of the graft chains on the SiLK surface and into the metal matrix, and the fact that the graft chains were covalently tethered on the SiLK surface. (C) 2002 The Electrochemical Society.

Study on Chemical Vapor Deposited Copper Films on Cyano and Carboxylic Self-Assembled Monolayer Diffusion Barriers

Enhanced Cvd of Copper Films on Self-Assembled Monolayers As Ultrathin Diffusion Barriers

Characterization of Chemical Vapor Deposited Copper Films on Mercaptan Self-Assembled Monolayer Diffusion Barriers

Effects of Terminated Functional Groups of Self-assembled Monolayers on Chemical Vapor-deposited Copper Films

Electroless Plating of Copper via a Sn-Free Process on Dielectric SiLK Surface Modified by UV-Induced Graft Copolymerization with 4-Vinylpyridine and 1-Vinylimidazole

In situ functionalized self-assembled monolayer surfaces for selective chemical vapor deposition of copper

Effects of amino-terminated self-assembled monolayers on nucleation and growth of chemical vapor-deposited copper films

Chemical Vapor Deposition Mechanism of Copper Films on Silicon Substrates

Study on Preparation Method for Short-Chain Alkylsiloxane Self-Assembled Monolayers and the Diffusion Behavior of Copper on Silica Surfaces

Site-selective deposition of copper by controlling surface reactivity of SAMs with UV-irradiation

Vapor-Phase Self-Assembled Monolayer With Functional Groups as a Copper Diffusion Barrier Layer for InSnZnO Thin-Film Transistors

Self-assembled monolayer of ammonium pyrrolidine dithiocarbamate on copper detected using electrochemical methods, surface enhanced Raman scattering and quantum chemistry calculations

Preparation and study of complex self-assembled film as a super-thin barrier on silver

Preparation and Characterization of Copper Oxide Thin Films Deposited by Filtered Cathodic Vacuum Arc

Structure and Properties of Electrocodeposited Cu-Al2o3 Nanocomposite Thin Films

Electroless Ni–Mo–P Diffusion Barriers with Pd-activated Self-Assembled Monolayer on SiO2

Study on elastic modulus of ultra-thin copper films by in-situ SEM-SPM nanoindentation

Fabrication and characterization of a Cu seed layer on a 60-nm trench-patterned SiO2 substrate by a self-assembled-monolayer (SAM) process

A New Method to Obtain Cu Films with Lower Resistivity and Higher Interface Adhesion on Different Substrates

Analysis of Electrochemical Impedance and XRD Spectroscopy for Complex Self-Assembled Film on Silver

Study of ultrathin vanadium nitride as diffusion barrier for copper interconnect