Abstract:Printing of electrical circuits and interconnects using isotropic conductive adhesives (ICAs) is of great interest due to their low-temperature processing and compatibility with substrates for applications in sensors, healthcare, and flexible devices. As a lower cost alternative to silver (Ag), copper (Cu)-filled ICAs are desirable but limited by the formation of high-resistivity Cu surface oxides. To overcome this limitation, self-assembled monolayers (SAMs) of octadecanethiol (ODT) have been demonstrated to reduce the oxidation of micrometer-scale Cu powder particles for use in ICAs. However, the deposition and function of the SAM require further investigation, as described in this paper. As part of this work, the stages of the SAM deposition process, which included etching with hydrochloric acid to remove pre-existing oxides, were studied using X-ray photoelectron spectroscopy (XPS), which showed low levels of subsequent Cu oxidation when ODT coated. The treated Cu powders were combined with one- or two-part epoxy resins to make Cu-ICAs, and the effect of the Cu surface condition and weight loading on electrical conductivity was examined. When thermally cured in an inert argon atmosphere, ICAs filled with Cu protected by ODT achieved electrical conductivity up to 20 × 105 S·m-1, comparable to Ag-ICAs, and were used to make a functional circuit. To understand the function of the SAM in these Cu-ICAs, scanning and transmission electron microscopy were used to examine the internal micro- and nano-structures along with the elemental distribution at the interfaces within sections taken from cured samples. Sulfur (S), indicative of the ODT, was still detected at the internal polymer-metal interface after curing, and particle-to-particle contacts were also examined. XPS also identified S on the surface of cured Cu-ICAs even after thermal treatment. Based on the observations, electrical contact and conduction mechanisms for these Cu-filled ICAs are proposed and discussed.

Fabrication and characterization of a Cu seed layer on a 60-nm trench-patterned SiO2 substrate by a self-assembled-monolayer (SAM) process

A barrier/seed system for electroless metallization on complex surfaces using (aminomethylaminoethyl)phenethyltrimethoxysilane self-assembled films

In situ functionalized self-assembled monolayer surfaces for selective chemical vapor deposition of copper

Fabrication of colloidal gold micro-patterns using photolithographed self-assembled monolayers as templates

Electroless Cu Deposition Process on TiN for ULSI Interconnect Fabrication Via Pd/Sn Colloid Activation

Emerging Non-Noble-Metal Atomic Layer Deposited Copper as Seeds for Electroless Copper Deposition

New formation process of plating thin films on several substrates by means of self-assembled monolayer (SAM) process

Site-selective deposition of copper by controlling surface reactivity of SAMs with UV-irradiation

Fabrication of Potential NiMoP Diffusion Barrier/seed Layers for Cu Interconnects Via Electroless Deposition

A Three-Dimensional Microfabrication Technology on Highly Structured Surfaces

Multilayer Formation of Copper Ions (cu2+) Deposited Onto Self-Assembled Monolayers of Alkanedithiols on Au (111) Surfaces

Seeded Growth Fabrication of Cu-on-Si Electrodes for in Situ ATR-SEIRAS Applications

Fabrication of Designed Architectures of Au Nanoparticles on Solid Substrate with Printed Self-Assembled Monolayers As Templates

Research of an integrated fabrication process of barrier layer and seed layer used in through silicon via

Fabrication of Patterned Self-Assembled Monolayers on Silicon Substrate

Study on Chemical Vapor Deposited Copper Films on Cyano and Carboxylic Self-Assembled Monolayer Diffusion Barriers

Fabrication of uniform and high resolution copper nanowire using intermediate self-assembled monolayers through direct AFM lithography

Self-assembly of organic monolayers as protective and conductive bridges for nanometric surface-mount applications

Vapor-Phase Self-Assembled Monolayer With Functional Groups as a Copper Diffusion Barrier Layer for InSnZnO Thin-Film Transistors

The Role of Self-Assembled Monolayers in the Surface Modification and Interfacial Contact of Copper Fillers in Electrically Conductive Adhesives

Experimental Analysis Of The Co-Deposition Of Metal Cu And Nano-Sized Sic Particles With Ctab In Micro Via Filling