Abstract:As the integration of chips in 3D integrated circuits (ICs) increases and the size of micro-bumps reduces, issues with the reliability of service due to electromigration and thermomigration are becoming more prevalent. In the practical application of solder joints, an increase in the grain size of intermetallic compounds (IMCs) has been observed during the reflow process. This phenomenon results in an increased thickness of the IMC layer, accompanied by a proportional increase in the volume of the IMC layer within the joint. The brittle nature of IMC renders it susceptible to excessive growth in small-sized joints, which has the potential to negatively impact the reliability of the welded joint. It is therefore of the utmost importance to regulate the formation and growth of IMCs. The following paper presents the electrodeposition of a Ni-W layer on a Cu substrate, forming a barrier layer. Subsequently, the barrier properties between the Sn/Cu reactive couples were subjected to a comprehensive and systematic investigation. The study indicates that the Ni-W layer has the capacity to impede the diffusion of Sn atoms into Cu. Furthermore, the Ni-W layer is a viable diffusion barrier at the Sn/Cu interface. The "bright layer" Ni2WSn4 can be observed in all Ni-W coatings during the soldering reflow process, and its growth was almost linear. The structure of the Ni-W layer is such that it reduces the barrier properties that would otherwise be inherent to it. This is due to the "bright layer" Ni2WSn4 that covers the original Ni-W barrier layer. At a temperature of 300 °C for a duration of 600 s, the Ni-W barrier layer loses its blocking function. Once the "bright layer" Ni2WSn4 has completely covered the original Ni-W barrier layer, the diffusion activation energy for Sn diffusion into the Cu substrate side will be significantly reduced, particularly in areas where the distortion energy is concentrated due to electroplating tension. Both the "bright layer" Ni2WSn4 and Sn will grow rapidly, with the formation of Cu-Sn intermetallic compounds (IMCs). At temperatures of 250 °C, the growth of Ni3Sn4-based IMCs is controlled by grain boundaries. Conversely, the growth of the Ni2WSn4 layer (consumption of Ni-W layer) is influenced by a combination of grain boundary diffusion and bulk diffusion. At temperatures of 275 °C and 300 °C, the growth of Ni3Sn4-based IMCs and the Ni2WSn4 layer (consumption of Ni-W layer) are both controlled by grain boundaries. The findings of this study can inform the theoretical design of solder joints with barrier layers as well as the selection of Ni-W diffusion barrier layers for use in different soldering processes. This can, in turn, enhance the reliability of microelectronic devices, offering significant theoretical and practical value.

Fabrication of Potential NiMoP Diffusion Barrier/seed Layers for Cu Interconnects Via Electroless Deposition

Electroless Plating Ni-based Barrier Layers for 3D Interconnection

Electroless Nimop Thin Film Deposition On Si/Sio2

Electroless Ni–Mo–P Diffusion Barriers with Pd-activated Self-Assembled Monolayer on SiO2

Electroless Plating Ni-based Barrier Layers for Silicon Vertical Interconnects

Growing process and reaction mechanism of electroless Ni-Mo-P film on SiO_2 substrate

Electroless nickel alloy deposition on SiO2 for application as a diffusion barrier and seed layer in 3D copper interconnect technology

Study on Electroless Deposition Nimop Layer by Sam

Influence of Crystalline Structure on Diffusion Barrier Property of Electroless Ni–Fe–P Coatings in Zn–Al Solder Interconnects

Diffusion Barrier Performance of Ni-W Layer at Sn/Cu Interfacial Reaction

Study on CMP of Copper Interconnect with Novel Mo-Based Diffusion Barriers

Electroless Cu Deposition Process on TiN for ULSI Interconnect Fabrication Via Pd/Sn Colloid Activation

Interfacial reaction between Sn-Ag solder and electroless Ni-Fe-P diffusion barriers with different internal microstructure

Effective method to disperse and incorporate Carbon nanotubes in electroless Ni-P deposits

Comparison of Diffusion Barrier Properties of Ni–Fe and Ni–Fe–W Layer at the Cu/Sn Interface

Ultra-Thin Ru/TaN Bi-Layer as Diffusion Barrier to Seedless Copper Interconnect

Direct copper electrodeposition on novel CoMo diffusion barrier

Fabrication and characterization of a Cu seed layer on a 60-nm trench-patterned SiO2 substrate by a self-assembled-monolayer (SAM) process

Fabrication of nanopatterned metal layers on silicon by nanoindentation / nanoscratching and electrodeposition

In-Situ Observation of the Formation of NiSi/Ni<sub>2</sub>Si Heterojunction in SiGe Nanowire with Al<sub>2</sub>O<sub>3</sub> Diffusion Barrier Layer

Recent Advances in Barrier Layer of Cu Interconnects