Abstract:Atmospheric Pressure Plasma Processing (APPP) of silicon-based optics and wafers is a form of chemical etching technology developed in recent years. The material removal rate is comparable to those of conventional mechanical processing methods in precision fabrication. Moreover, there is no mechanical contact or physical loading on the substrate surface, hence no surface or sub-surface damages are induced. Inductively coupled plasma is one realization of APPP. In this work, inductively coupled plasma torch is used to generate plasma and excite etchant particles at atmospheric pressure. These active particles then diffused to the workpiece surface, react with its atoms to form volatile products. The activity and number of particles in plasma are influenced by processing parameters such as input power, distance between nozzle and substrate surface, flow rate of plasma gas argon and precursor gas CF4. These factors have various impacts on material removal rate. Processing experiments are conducted on fused silica to investigate the parameters’ influences on material removal rate. The basic interaction between substrate surface and plasma is illustrated, then the relationships between processing parameters and material removal rate are analyzed. From the experiments some trends are derived. Material removal rate rises with the increase of power and flow rate of CF4, whereas decreases with the increase of processing distance, etc. The etching footprint is proved to be near Gaussian-shaped and believed to have high potential for deterministic surface processing.

Investigation of A Plasma-Etching Process That Uses A Porous Dielectric Template

Ion Current Distribution During Deposition of Dielectric Material Using an Insulating Porous Alumina Template

Nanosphere monolayer-templated, ion-assisted nanofeature etching in dielectric materials: a numerical simulation of nanoscale ion flux topography.

Pulsed N2 Plasma Surface Treatment for AlGaN/GaN HEMTs Prior to PECVD SiNx Passivation to Reduce Plasma Damage

Study on the Key Parameters in Etching of Fused Silica Using Atmospheric Inductively Coupled Plasma

Pulsed I-Pvd of Dielectric Nanodot Arrays Using a Nanoporous Template

Numerical Studies on Etching Profiles in Low-pressure High-density Plasma

Fabrication of Nano-Aperture Hollow Tip Array for Microplasma Etching

Study of the plasma etching process for low-loss SiO2/Si optical waveguides

Templated I‐pvd of Metallic Nanodot Arrays

Optimization of inductively coupled plasma deep etching of GaN and etching damage analysis

Cryogenic Etching of Porous Material

Design and Experiments of Microplasma Reactor for Scanning Plasma Etching

Numerical Simulations of Lag Effect in Fixed-Width-Structure Plasma Etching

Etching Damage Analysis and Optimization of Inductively Coupled Plasma Etching of GaN

Nanopore Processing in Dielectric Materials and Dielectric Template-Assisted Nanoarray Synthesis: Using Pulsed Bias to Enhance Process Throughput and Precision

Selective etching of GaN/ AlGaN by Inductively coupled plasma

The reactive ion etching characteristics of AlGaN/GaN SLs and etch-induced damage study of n-GaN using Cl2/SiCl4/Ar plasma

Comparison of glancing-angle scatterings on different materials in a high aspect ratio plasma etching process using molecular dynamics simulation

Plasma Process. Polym. 6/2007

Research of etching process of Al0.8Sc0.2N based on ICP etching equipment