Abstract:It has recently been shown that solid-state nanometer-scale pores ('nanopores') can be used as highly sensitive single-molecule sensors. For example, electrophoretic translocation of DNA, RNA and proteins through such nanopores has enabled both detection and structural analysis of these complex biomolecules. Control over the nanopore size is critical as the pore must be comparable in size to the analyte molecule in question. The most widely used fabrication methods are based on focused electron or ion beams and thus require (scanning) transmission electron microscopy and focused ion beam (FIB) instrumentation. Even though very small pores have been made using these approaches, several issues remain. These include the requirement of being restricted to rather thin, mechanically less stable membranes, particularly for pore diameters in the single-digit nanometer range, lack of control of the surface properties at and inside the nanopore, and finally, the fabrication cost. In the proof-of-concept study, we report on a novel and simple route for fabricating metal nanopores with apparent diameters below 20 nm using electrodeposition and real-time ionic current feedback in solution. This fabrication approach inserts considerable flexibility into the kinds of platforms that can be used and the nanopore membrane material. Starting from much larger pores, which are straightforward to make using FIB or other semiconductor fabrication methods, we electrodeposit Pt at the nanopore interface while monitoring its ionic conductance at the same time in a bi-potentiostatic setup. Due to the deposition of Pt, the nanopore decreases in size, resulting in a decrease of the pore conductance. Once a desired pore conductance has been reached, the electrodeposition process is stopped by switching the potential of the membrane electrode and the fabrication process is complete. Furthermore, we demonstrate that these pores can be used for single-biomolecule analysis, such as that of λ-DNA, which we use in a proof-of-concept study. Importantly, our approach is applicable to single nanopores as well as nanopore arrays, and can easily be extended to deposits of metal other than Pt.

Nanopore Processing in Dielectric Materials and Dielectric Template-Assisted Nanoarray Synthesis: Using Pulsed Bias to Enhance Process Throughput and Precision

Optical Device Based on a Nanopillar Array by the Pattern Transfer of an Anodic Aluminum Oxide Membrane

Electrostatic‐Driven Dynamic Jamming of 2D Nanoparticles at Interfaces for Controlled Molecular Diffusion

Manipulation and Optimization of Electron Transport by Nanopore Array Targets

Control of deposition channels in nanosphere templates for high-density nanodot array production

Direct Surface Nanopatterning Using Pyramidal Silicon Nanopore Arrays As Templates

Ion Concentration Polarization Tunes Interpore Interactions and Transport Properties of Nanopore Arrays

Tailored Fabrication of 3D Nanopores with Dielectric Oxides for Multiple Nanoscale Applications

Nanopore Design for Exceptional Rectification of DNA Translocation

Nanopore Fabrication by Controlled Dielectric Breakdown

An optimized nanoparticle separator enabled by electron beam induced deposition

Real Time and in Situ Control of the Gap Size of Nanoelectrodes for Molecular Devices

Fabrication of Sub-20 Nm Nanopore Arrays in Membranes with Embedded Metal Electrodes at Wafer Scales

Achieving a sub-10 nm nanopore array in silicon by metal-assisted chemical etching and machine learning

Suppressing of Secondary Electron Diffusion for High-Precision Nanofabrication

Photothermally Assisted Thinning of Silicon Nitride Membranes for Ultrathin Asymmetric Nanopores.

Fabrication of Silicon Nanopore Arrays Using A Combination of Dry and Wet Etching

Pore-forming Confined Space for the Innovative Electrochemical Methods

A Method of Controlling the Hole Size of Nanopores Array on Anodic Aluminum Oxide

Controlled size reduction and its underlying mechanism to form solid-state nanopores via electron beam induced carbon deposition

Precise electrochemical fabrication of sub-20 nm solid-state nanopores for single-molecule biosensing