Abstract:In this work , Csf/SiC composite was hot pressed by adding short carbon fiber and nano carbon black and nano SiC powder into SiC powder by rapid hot press sintering in order to improve the fracture toughness and other mechanical properties .The density, hardness, phase composition, mechanical properties of Csf/SiC composite were studied, the toughening principle was also discussed. The results indicated that: the Csf/SiC composite had a high density of above 98% in less than 30vol.% short carbon fiber . The hardness was decreased with the increase of the amount of Csf fibe. The composite were mainly composed of 6H-SiC and C, the high temperature graphitization of short carbon fiber resulted the diffraction peaks of C in crystalline by XRD. Short carbon fibers were distributed uniformly and no aggregation in the matrix when contents of fiber were less 30vol.% by SEM test. The bending strength of the composite reached 423MPa at optimal conditions. Too many fibers in the matrix led to decline of bending strength sharply. The fracture toughness reached 4.9MPa·m 1/2 of maximum with more obvious toughening effect. The debonding, pullout and breakage behaviors of the Csf fiber and crack propagation were identified as the dominant toughing mechanism in such composites.

Room-temperature fracture toughness of in-situ SiC particle-reinforced MoSi2 composites

Toughening of MoSi2-SiC composite synthesized in situ

Microstructure and mechanical properties of in situ SiC particulates reinforced MoSi2 matrix composite

Mechanical Properties of SiC-Whisker-Reinforced MoSi<sub>2</sub> Composites

Si3N4-SiC ceramic nanocomposites

Elevated temperature strengthening of synthesized in situ MoSi2-SiC composite

Influence of Nowonty Phase on the Fracture Toughness of SiC/MoSi2 Composites

Mo effect on the phase stability and room-temperature fracture toughness of Nb/Nb5Si3 in-situ composites

Microstructure and Mechanical Properties of SiC F /sibcn Ceramic Matrix Composites

Spark plasma sintering of TiC-based composites toughened by submicron SiC particles

Correlation between phase content and mechanical properties of SiCw- ZTA composites sintered by SPS

Improved Mechanical Properties of Csf/SiC Composite by Rapid Hot Press Sintering

Microstructure and Properties of MoSi 2 Intermetallic Reinforced and Toughening by Carbon Nanotube

Influence of nanosized SiC particle on the fracture toughness of ZrB2-based nanocomposite ceramic

Mechanical Properties and Toughening Mechanisms of Si3n4 Matrix Laminated Ceramic Composite

Phase composition and mechanical properties of in-situ synthetic Mo-Si compound composites

The Microstructure and Mechanical Property of Mo(Si, Al)2-SiC Composite Prepared by Infiltrating Melt Aluminum

High-temperature tensile behavior of 3D SiC/SiC composites

Microstructure and Properties of Hot Pressed Zr2(Al(Si))4C5/SiC Composites

Fabrication and Mechanical Properties of SiCw/MoSi2–SiC Composites by Liquid Si Infiltration of Pyrolyzed Rice Husk Preforms with Mo Additions

SiC-nanoparticle-reinforced Si3N4 matrix composites