Abstract:Zhang, Zhenlin ; Xiao, Ying ; Xu, Jun ; Li, Chao ; Tan, Feng-Liang ; Luo, Yajun ; Liu, Kecai ; In this study, Al-Si-Cu-Mg composites reinforced with Silicon carbide (SiC) particles and/or Carbon nanotubes (CNTs) were fabricated using semi-solid stirring casting technology (SSC). The aim of the study was to investigate the influence of SiC and/or CNTs on the mechanical properties, microstructural evolution, and deformation mechanisms of the Al-Si-Cu-Mg alloy. The findings indicated that the presence of SiC/CNTs in the composite had a significant effect on refining the α-Al phase and altering its grain orientation. Additionally, the results obtained from EBSD and TEM revealed that the microstructure of the Al-Si-Cu-Mg-SiC/CNTs hybrid composite (HAMC) underwent dynamic recrystallization (DRX) and static recrystallization (SRX), resulting in a fine equiaxed recrystallized structure. This process also led to the formation of high-angle grain boundaries (HAGBs) through dislocation rearrangement. The SiC particles were evenly distributed within the matrix, ensuring good interface bonding between SiC and α-Al phases. Moreover, the CNTs reacted with the matrix, resulting in the in-situ formation of the Al4C3 phase at the interface. The addition of SiC/CNTs significantly increased the tensile strength of HAMC at 25°C and 250°C, from 319MPa and 178MPa to 438MPa and 331MPa. Examination of the fracture surface of the hybrid composite unveiled that void formation occurred primarily at the regions surrounding the matrix-particle interface.

Toughening of MoSi2-SiC composite synthesized in situ

High temperature creep behavior of in situ synthesized MoSi2-30%SiC composite

Toughening mechanisms of Ti3SiC2- and TiB2- toughened SiC matrix prepared via reactive melt infiltration

Microstructure and mechanical properties of a Mo-toughened Mo 3 Si-based in situ nanocomposite

Interfacial Regulation and Fracture Mechanism of Al–Si/SiC Composites Infiltrated under Super-Gravity Field

Microstructure Defects of MoSi2-SiC Composite Synthesized in Situ

Microstructure and mechanical behavior of carbon fiber reinforced carbon, silicon carbide, and copper alloy hybrid composite fabricated by Cu-Si alloy melt infiltration

Microstructure characterization and mechanical properties of in situ synthesized Ti2(Al,Si)C reinforced Al composites

Study on the toughening mechanism of in-situ synthesis (TixZr1−x)B2 in solid-state sintered SiC composite ceramics

In-situ Preparation of Nano MoSi 2 SiC Composite by Melt Infiltration of Silicon Method

Microstructures and mechanical properties of in-situ SiC-TiB2 ceramic composites fabricated by reactive melt infiltration

Microstructural Characterization of Sintered MoSi<sub>2</sub>/SiC<sub>P</sub> Composites

Microstructure, Mechanical, and Thermal Properties of in Situ-Synthesized (zrb2+sic)/zr2[al(si)]4c5 Composites

Microstructural characterization of sintered MoSi2/SiCp composites

Si3N4-SiC ceramic nanocomposites

SiC/SiC mini-composites with multilayer ZrSiO4 interphase: Room-temperature properties and toughening mechanism

Tunable strength of SiC<sub>f</sub>/-Yb<sub>2</sub>Si<sub>2</sub>O<sub>7</sub> interface for different requirements in SiC<sub>f</sub>/SiC CMC: Inspiration from model composite investigation

Mechanical Properties of SiC-Whisker-Reinforced MoSi<sub>2</sub> Composites

Spark plasma sintering of TiC-based composites toughened by submicron SiC particles

Microstructure Evolution and Mechanical Behaviors of SiCp/CNTs Hybrid Reinforced Al-Si-Cu-Mg Composite by Semi-solid Stir Casting

In situ observation of fracture in homogeneous and functionally graded 6061Al/SiCp composites