Abstract:The long-term periodicity and uncontrollable interface properties during the preparation process for silicon carbide fiber reinforced silicon carbide-based composites (SiCf/SiC CMC) make it difficult to thoroughly investigate their mechanical damage behavior under complex loading conditions. To delve deeper into the influence of the interface strength and toughness on the mechanical response of microscopic representative volume element (RVE) models under complex loading conditions, in this work, based on numerical simulation methods, a microscale representative volume element (RVE) with periodic symmetric boundary conditions for the material is constructed. The phase-field fracture theory and cohesive zone model are coupled to capture the brittle cracking of the matrix and the debonding behavior at the fiber/matrix interface. Simulation analysis is conducted for tensile, compressive, and shear loading as well as combined loading, and the validity of the model is verified based on the Chamis theory. Further investigation is conducted into the mechanical response behavior of the microscale RVE model under complex loading conditions in relation to the interface strength and interface toughness. The results indicate that under uniaxial loading, increasing the interface strength leads to a tighter bond between the fiber and matrix, suppressing crack initiation and propagation, and significantly increasing the material's fracture strength. However, compared to the transverse compressive strength, increasing the interface strength does not continuously enhance the strength under other loading conditions. Meanwhile, under the condition of strong interface strength of 400 MPa, an increase in the interface toughness significantly increases the transverse compressive strength of the material. When it increases from 2 J/m2 to 20 J/m2, the transverse compressive strength increases by 28.49%. Under biaxial combined loading, increasing the interface strength significantly widens the failure envelope space under σ2-τ23 combined loading; with the transition from transverse compressive stress to tensile stress, the transverse shear strength shows a trend of first increasing and then decreasing, and when the ratio of transverse shear displacement to transverse tensile/compressive displacement is −1, it reaches the maximum. This study provides strong numerical support for the investigation of the interface properties and mechanical behavior of SiCf/SiC composites under complex loading conditions, offering important references for engineering design and material performance optimization.

Tunable strength of SiC<sub>f</sub>/-Yb<sub>2</sub>Si<sub>2</sub>O<sub>7</sub> interface for different requirements in SiC<sub>f</sub>/SiC CMC: Inspiration from model composite investigation

Rare earth monosilicates as oxidation resistant interphase for SiCf/SiC CMC: Investigation of SiCf/Yb2SiO5 model composites

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Fracture Mechanical and Ablation Behaviors of C/SiC-Cu3Si-Cu Interpenetrating Composites and Their Dependence on Metal Addition and Interface Thickness

The Influence of the Interface on the Micromechanical Behavior of Unidirectional Fiber-Reinforced Ceramic Matrix Composites: An Analysis Based on the Periodic Symmetric Boundary Conditions

Construction of compound interface in SiC f /mullite ceramic-matrix composites for enhanced mechanical and microwave absorbing performance

Interfacial Mechanical Properties of the Domestic 3rd Generation 2.5D SiCf/SiC Composite

Influence of fiber surface properties of SiCf/SiC composites on the interfacial debonding behavior

Mechanical Properties of Sicf/Sic Composites with Alternating Pyc/Bn Multilayer Interfaces

Mechanical Properties and Failure Behavior of 3D-SiCf/SiC Composites with Different Interphases

Microstructure and Mechanical Properties of SiC F /sibcn Ceramic Matrix Composites

Interfacial properties of SiCf/SiC minicomposites with a scheelite coating

Preparation and mechanical behavior of Yb2Si2O7 interphase in SiCf/SiC minicomposites

Effect of PyC/BN interfacial phases on mechanical behavior of SiC/SiC composites

Evaluation of Interfacial Properties in SiC Composites Using an Improved Cohesive Element Method

Tuning SiC nanowires interphase to improve the mechanical and electromagnetic wave absorption properties of SiCf/SiCnw/Si3N4 composites

Mechanical Properties and Interfaces of Cf/SiC Composites

Reinforcing Al matrix composites by novel intermetallic/SiC interface and transition structure

Investigation on crack propagation of SiCf/SiC composite via PF-CZM method

Damage Mechanism Analysis to the Carbon Fiber and Fiber-Ceramic Interface Tailoring of Cf/ZrC-SiC Using PyC Coating

Correlation Between Interfacial Structure and Toughness in SiC-Al Bilayers