Abstract:The effects of the SiC nanowires (SiCNWs) and PyC interface layers on the mechanical and anti-oxidation properties of SiC fiber (SiCf)/SiC composites were investigated. To achieve this, the PyC layer was coated on the SiCf using a chemical vapour infiltration (CVI) method. Then, SiCNWs were successfully coated on the surface of SiCf/PyC using the electrophoretic deposition method. Finally, a thin PyC layer was coated on the surface of SiCf/PyC/SiCNWs. Three mini-composites, SiCf/PyC/SiC, SiCf/PyC/SiCNWs/SiC, and SiCf/PyC/SiCNWs/PyC/SiC, were fabricated using the typical precursor infiltration and pyrolysis method. The morphologies of the samples were examined using scanning electron microscopy and energy dispersive X-ray spectrometry. Tensile and single-fibre push-out tests were carried out to investigate the mechanical performance and interfacial shear strength of the composites before and after oxidization at 1200 °C. The results revealed that the SiCf/PyC/SiCNWs/SiC composites showed the best mechanical and anti-oxidation performance among all the composites investigated. The strengthening and toughening is mainly achieved by SiCNWs optimization of the interfacial bonding strength of the composite and its own nano-toughening. On the basis of the results, the effects of SiCNWs on the oxidation process and retardation mechanism of the SiCf/SiC mini-composites were investigated.

What problem does this paper attempt to address?

This paper aims to study the effects of SiC nanowires (SiCNWs) and PyC interfacial layers on the mechanical properties and oxidation resistance of SiC fiber-reinforced SiC matrix composites (SiCf/SiC mini-composites). Specifically, a PyC layer was coated on the surface of SiC fibers through the chemical vapor infiltration (CVI) method, and SiCNWs were further deposited on its surface using electrophoretic deposition (EPD) technology. Three different types of composites were ultimately prepared: SiCf/PyC/SiC, SiCf/PyC/SiCNWs/SiC, and SiCf/PyC/SiCNWs/PyC/SiC. The mechanical properties and interfacial shear strength of these composites were evaluated through tensile tests and single-fiber push-out tests, and oxidation experiments were conducted at 1200°C to investigate their oxidation resistance. The study shows that the introduction of SiCNWs significantly improves the mechanical properties and oxidation resistance of the composites. In particular, the SiCf/PyC/SiCNWs/SiC composite exhibits the best mechanical properties and oxidation resistance. Additionally, the role of SiCNWs in the high-temperature oxidation process and their impact on oxidation resistance were investigated through scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS). The paper also discusses the effects of SiCNWs on optimizing the interfacial bonding strength of the composites and their own nano-toughening effects. Overall, this study provides important theoretical basis and technical support for enhancing the application potential of SiCf/SiC composites in the aerospace field.

Mechanical properties and strengthening mechanism of SiCf/SiC mini-composites modified by SiC nanowires

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

Siliconization elimination for SiC coated C/C composites by a pyrolytic carbon coating and the consequent improvement of the mechanical property and oxidation resistances

Anti-oxidation performance of mini SiC/SiC composites containing ZrSiO 4 multilayer interphase

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Oxidation resistance of SiCf/SiC composites with a PyC/SiC multilayer interface at 500 °C to 1100°C

Improved antioxidative and mechanical properties of SiC coated C/C composites via a SiO2-SiC reticulated layer

Enhanced thermal and mechanical properties of optimized S i C f / S i C composites with in-situ CNTs on PyC interface

In-situ SiC nanowires reinforced SiC-based multicomponent ceramic coating for protecting SiOC/CF composites

Oxidation resistance behavior of SiC nanowires/Si layer on the C/SiC composites

Preparation and tensile behavior of SiCf/SiC mini composites containing different types and thicknesses of interphase

Oxidation behavior of 3D SiCf/SiBCN composites at 800–1200 °C

Effect of SiCnws on flexural strength of SiCf/HfC-SiC composites after impact and ablation

Multifunction properties of SiOC reinforced with carbon fiber and in-situ SiC nanowires

Interfacial properties of SiCf/SiC minicomposites with a scheelite coating

Effects of in situ formed nanostructures on the structure and properties of C/SiOC composites

Fabrication and characterization of pyrolytic carbons from phenolic resin reinforced by SiC nanowires with chain-bead structures

Study on the Tribological Properties of Carbon Fabric/Polyimide Composites Filled with SiC Nanoparticles

3C-SiC Nanowires In-Situ Modified Carbon/Carbon Composites and Their Effect on Mechanical and Thermal Properties