Abstract:SiCf/SiC composite materials had become a research hotspot in the fields of aerospace materials and nuclear materials in recent years. This materials have high strength, radiation resistance, high temperature resistance and oxidation resistance. However, SiC is a typical brittle material prone to being damaged due to stress concentration in some cases, leading to cracks and even component failure. Therefore, this study employed an accurate and efficient numerical simulation method, phase field cohesive zone method (PFCZM), to investigate the microscopic damage behavior of SiCf/SiC composite materials. This study aimed to illustrate the influence of the thickness of pyrolytic carbon (PyC) interface layer on the failure behavior of SiCf/SiC composite materials. Firstly, this study conducted relevant verification of PFCZM. Secondly, numerical simulations of crack initiation, crack propagation, and final damage were performed by establishing a representative volume element (RVE). Observing the simulation results, it was noted that at low strain, when PyC was thicker, the SiCf/SiC composite materials exhibited slight damage to both the SiC matrix and PyC interface. Conversely, when PyC was thinner, the SiCf/SiC composite materials displayed only slight damage to PyC interface. As the PyC thickness increases, the damage to PyC interface decreases, while the damage to SiC becomes more prominent. Simultaneously, a competitive relationship in the damage behavior of SiCf/SiC composite materials can be found after the SiC matrix has cracked: When PyC is thinner, the damage primarily manifests as interlayer delamination between the SiC matrix and the SiC fiber. Conversely, when PyC is thicker, it manifests in PyC failure. Finally, this study concluded that, in this investigation, a PyC interface layer with a thickness of 0.1 μm exhibited the most effective protective effect on SiCf/SiC composite material.

Study on toughening mechanisms of pyrolytic carbon interface layer in Cf/ZrB2-SiC composites using in-situ tensile experimental and numerical methods

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Effect of Pyrolytic Carbon Coating on the Microstructure and Fracture Behavior of the Cf/ZrB2-SiC Composite

Damage Mechanism Analysis to the Carbon Fiber and Fiber-Ceramic Interface Tailoring of Cf/ZrC-SiC Using PyC Coating

Investigation on crack propagation of SiCf/SiC composite via PF-CZM method

Exploring the Toughening Mechanisms of PyC Interphase in SiCf/SiC Composites Through Molecular Dynamics and Mesoscale Stochastic Simulations

Using PyC Coated Short Chopped Carbon Fiber to Tackle the Dilemma Between Toughness and Strength of ZrC-SiC

Actively-controlled PyC Interphase Failure Mechanisms in C/SiC Composite Revealed Using Micro-Mechanical Interfacial Testing

PyC interphase growth mechanism and control models of C/SiC composites

Influences of Py C/SiC/TaC Interfaces on Mechanical Properties of 3 D Fine-woven Punctured Cf/C Composites

In-situ Matrix and Interfacial Damage Evolution of T-300TM Cf/SiC Mini-Composites with Single/hybrid Texture PyC Microstructures under Tensile Loading

Effect of Pyrolytic Carbon Interface Thickness on Microstructure and Mechanical Properties of Lightweight Zirconium Boride Modified Carbon-Bonded Carbon Fiber Composites

Microstructure, Properties and Damage Characteristics of Designed PyC Interphase in Cf/SiC Mini-composites

The Improvement of Mechanical Properties of SiC/SiC Composites by in Situ Introducing Vertically Aligned Carbon Nanotubes on the PyC Interface

Influence of a Pre-Coated Pyrocarbon Layer on the Microstructure and Mechanical Properties of ZrC-doped C/C Composites

Influence of thickness of pyrolytic carbon interphase on the mechanical behavior of SiC/(BN/PyC)/SiC composites

Design and Optimization of the Coating Thickness on Chopped Carbon Fibers and Sintering Temperature for ZrB2-SiC-C-f Composites Prepared by Hot Pressing

Microstructural Evolution and Mechanical Behaviors of Cf/Cm-SiC-(ZrxHf1−x)C Composites with Different Carbon Matrices

Effects of Polymer-Derived ZiC Interlayer on Mechanical Properties and Ablation Performance of C/C-ZiC-ZrC-SiC Composites Prepared by RMI

Effect of Pyrocarbon Interphase Texture and Thickness on Tensile Damage and Fracture in T‐700™ Carbon Fiber–reinforced Silicon Carbide Minicomposites

Effect of pyrocarbon interphase texture and thickness on tensile damage and fracture in T‐700TM carbon fiber–reinforced silicon carbide minicomposites