Abstract:SiCf/SiC composite materials had become a research hotspot in the fields of aerospace materials and nuclear materials in recent years. This materials have high strength, radiation resistance, high temperature resistance and oxidation resistance. However, SiC is a typical brittle material prone to being damaged due to stress concentration in some cases, leading to cracks and even component failure. Therefore, this study employed an accurate and efficient numerical simulation method, phase field cohesive zone method (PFCZM), to investigate the microscopic damage behavior of SiCf/SiC composite materials. This study aimed to illustrate the influence of the thickness of pyrolytic carbon (PyC) interface layer on the failure behavior of SiCf/SiC composite materials. Firstly, this study conducted relevant verification of PFCZM. Secondly, numerical simulations of crack initiation, crack propagation, and final damage were performed by establishing a representative volume element (RVE). Observing the simulation results, it was noted that at low strain, when PyC was thicker, the SiCf/SiC composite materials exhibited slight damage to both the SiC matrix and PyC interface. Conversely, when PyC was thinner, the SiCf/SiC composite materials displayed only slight damage to PyC interface. As the PyC thickness increases, the damage to PyC interface decreases, while the damage to SiC becomes more prominent. Simultaneously, a competitive relationship in the damage behavior of SiCf/SiC composite materials can be found after the SiC matrix has cracked: When PyC is thinner, the damage primarily manifests as interlayer delamination between the SiC matrix and the SiC fiber. Conversely, when PyC is thicker, it manifests in PyC failure. Finally, this study concluded that, in this investigation, a PyC interface layer with a thickness of 0.1 μm exhibited the most effective protective effect on SiCf/SiC composite material.

Microstructural investigations of the pyrocarbon interphase in SiC fiber-reinforced SiC matrix composites

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Mechanical Properties and Failure Behavior of 3D-SiCf/SiC Composites with Different Interphases

PyC interphase growth mechanism and control models of C/SiC composites

Microstructure and mechanical properties of SiC f /SiC composite prepared by chemical vapor infiltration

Preparation and tensile behavior of SiCf/SiC mini composites containing different types and thicknesses of interphase

Influence of thickness of pyrolytic carbon interphase on the mechanical behavior of SiC/(BN/PyC)/SiC composites

Microstructure and mechanical properties of SiC/SiC joints reinforced by in-situ growth SiC nanowires

Study on toughening mechanisms of pyrolytic carbon interface layer in Cf/ZrB2-SiC composites using in-situ tensile experimental and numerical methods

Effect of pyrocarbon interphase texture and thickness on tensile damage and fracture in T‐700TM carbon fiber–reinforced silicon carbide minicomposites

Effect of PyC/BN interfacial phases on mechanical behavior of SiC/SiC composites

Investigation on crack propagation of SiCf/SiC composite via PF-CZM method

Microstructure and mechanical properties of quasi-isotropic chopped fiber-reinforced PyC–SiC matrix composite prepared by novel nondamaging method

Molecular dynamics simulation on PyC interfacial failure mechanism and shear strength of SiC/SiC composites

Effects of the fiber surface characteristics on the interfacial microstructure and mechanical properties of the KD SiC fiber reinforced SiC matrix composites

The Effect of PyC/SiC Compound Interphase on the Properties of PIP SiC/SiC Composite

Mechanical properties and strengthening mechanism of SiCf/SiC mini-composites modified by SiC nanowires

In situ investigation of failure in 3D braided SiCf/SiC composites under flexural loading

Investigation on Cf/PyC Interfacial Properties of C/C Composites by the Molecular Dynamics Simulation Method

Effects of interfacial residual stress on mechanical behavior of SiCf/SiC composites

In-situ study of the fracture behavior of SiCf/SiC composite material under three-point bending