Abstract:The intricate spatial fiber winding structure of SiC f /SiC ceramic matrix composite (CMC) cladding tubes makes it difficult to investigate in depth the inherent evolutionary mechanism of damage failure under specific operating conditions. Therefore, in this study, based on X-ray computed tomography (X-CT) reconstruction and cross scale numerical simulation methods, combined with clamping failure experiments under specific conditions for the cladding tubes, we conduct an in-depth analysis of the material's damage, failure, and mechanical behavior in different clamped regions. The research indicates that variations in the clamped regions have a minimal impact on the overall mechanical feedback of the material, and the maximum clamping load remains essentially around 500 N. The tube damage exhibits a unique " regional progressive damage evolution mechanism," where stress differentials of 108.49% to 115.33% appear between the inner and outer surfaces in different regions, leading to variations in the initiation and propagation of cracks within these areas. Furthermore, based on the minimum potential energy principle and semi-geodesic line theory, the intricate macroscopic tube structure formed by the spatial stacking and winding of SiC f /SiC cladding tube fibers is accurately reconstructed, which is combined with macroscale and microscale local feature models to capture the fibre/matrix morphology of the material with dynamic mechanical feedbacks, and experimentally validated in this work. The results indicate that the numerical model can effectively characterize the complex mechanical damage morphology and progressive failure lows of SiC f /SiC CMC at multiscale. Simultaneously, it is observed that stress concentrations in the fiber crossover region result in a load-bearing capacity 112% to 283% higher than in other areas. This phenomenon often leads to the first occurrence of failure in this region after clamping overload, exhibiting more pronounced damage characteristics.

In situ investigation of failure in 3D braided SiCf/SiC composites under flexural loading

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

In-situ study of the fracture behavior of SiCf/SiC composite material under three-point bending

In situ Observation of Compression Damage in a Three-Dimensional Braided Carbon Fiber Reinforced Carbon and Silicon Carbide (C/C-SiC) Ceramic Composite

A Quantitative Representation of Damage and Failure Response of 3D Textile SiC/SiC Ceramics Matrix Composites Subjected to Flexural Loading

Research on damage evolution mechanisms under compressive and tensile tests of plain weave SiC f /SiC composites using in situ X-ray CT

Experimental and Numerical Study on the Bending Behavior of Satin-Woven SiCf/SiC Composites

In situ characterization of the flexural behavior and failure mechanism of 2D needle-punched carbon/carbon composites by digital image correlation

Characterisation of damage evolution in plain weave SiC/SiC composites using in situ X-ray micro-computed tomography

Morphology characterization and in-situ three-dimensional strain field monitor of short carbon fiber-reinforced polymer composites under tension

Damage mechanism identification and failure behavior of 2D needle-punched SiC f /SiC composites based on acoustic emission and digital image correlation

Damage and failure analysis of a SiCf/SiC ceramic matrix composite using digital image correlation and acoustic emission

Experimental and Numerical Study on Failure Behaviors of Composite Grid Stiffeners under Tensile and Flexural Loading

Experimental and Numerical Analysis of Progressive Damage of SiCf/SiC Composite under Three-Point Bending

Multi-scale Progressive Damage and Failure Behavior Analysis of Three-Dimensional Winding SiC Fiber-Reinforced SiC Matrix Composite Tube

Failure Evaluation of a SiC/SiC Ceramic Matrix Composite During In-Situ Loading Using Micro X-ray Computed Tomography

Experimental study on the fabrication, high-temperature properties and failure analysis of 3D seven-directional braided composites under compression

In situ tomographic study of a 3D-woven SiC/SiC composite part subjected to severe thermo-mechanical loads

Experimental and numerical study of in-plane compressive properties and failure of 3D six-directional braided composites with large braiding angle

Experimental characterization of failure behaviour for three-dimensional woven carbon/carbon composites under pin-loading

Analysis of Multi-scale Failure Behavior of SiC f /SiC Composite Clad Tube under Flexible Clamping Damage