Abstract:SiCf/SiC composite materials had become a research hotspot in the fields of aerospace materials and nuclear materials in recent years. This materials have high strength, radiation resistance, high temperature resistance and oxidation resistance. However, SiC is a typical brittle material prone to being damaged due to stress concentration in some cases, leading to cracks and even component failure. Therefore, this study employed an accurate and efficient numerical simulation method, phase field cohesive zone method (PFCZM), to investigate the microscopic damage behavior of SiCf/SiC composite materials. This study aimed to illustrate the influence of the thickness of pyrolytic carbon (PyC) interface layer on the failure behavior of SiCf/SiC composite materials. Firstly, this study conducted relevant verification of PFCZM. Secondly, numerical simulations of crack initiation, crack propagation, and final damage were performed by establishing a representative volume element (RVE). Observing the simulation results, it was noted that at low strain, when PyC was thicker, the SiCf/SiC composite materials exhibited slight damage to both the SiC matrix and PyC interface. Conversely, when PyC was thinner, the SiCf/SiC composite materials displayed only slight damage to PyC interface. As the PyC thickness increases, the damage to PyC interface decreases, while the damage to SiC becomes more prominent. Simultaneously, a competitive relationship in the damage behavior of SiCf/SiC composite materials can be found after the SiC matrix has cracked: When PyC is thinner, the damage primarily manifests as interlayer delamination between the SiC matrix and the SiC fiber. Conversely, when PyC is thicker, it manifests in PyC failure. Finally, this study concluded that, in this investigation, a PyC interface layer with a thickness of 0.1 μm exhibited the most effective protective effect on SiCf/SiC composite material.

In-situ study of the fracture behavior of SiCf/SiC composite material under three-point bending

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

In situ investigation of failure in 3D braided SiCf/SiC composites under flexural loading

In situ observation of fracture in homogeneous and functionally graded 6061Al/SiCp composites

Experimental and Numerical Study on the Bending Behavior of Satin-Woven SiCf/SiC Composites

Experimental and Numerical Analysis of Progressive Damage of SiCf/SiC Composite under Three-Point Bending

Microstructure and mechanical properties of SiC f /SiC composite prepared by chemical vapor infiltration

Fracture Behaviour of SiCp/Al Composites with Network Architecture

Damage Evolution and Fracture Behavior of C/SiC Minicomposites with Different Interphases under Uniaxial Tensile Load

Bending Properties and Failure Mechanism of Continuous W-Core-SiC Fiber-Reinforced 2024 and 6061 Aluminum Matrix Composites

Research on damage evolution mechanisms under compressive and tensile tests of plain weave SiC f /SiC composites using in situ X-ray CT

Micro/nanoscale mechanical characterization and in situ observation of cracking of laminated Si3N4/BN composites

A Combined Investigation of Bending Behavior of a SiC Fiber‐Reinforced Titanium Matrix Composite with Compressive and Tensile Tests

Damage behavior and mechanism of SiCp/Al composites under biaxial tension

On understanding the mechanical properties and damage behavior of C f /SiC composites by indentation method

Experimental investigation and multiscale simulation on the bending fatigue of 2D SiCf/SiC composites

In-situ characterization on the fracture behavior of three dimensional polymer nanocomposites reinforced by CNT sponge

Investigation on crack propagation of SiCf/SiC composite via PF-CZM method

In situ Observation of Compression Damage in a Three-Dimensional Braided Carbon Fiber Reinforced Carbon and Silicon Carbide (C/C-SiC) Ceramic Composite

Study on the fracture behavior and toughening mechanism of Si3N4/SiC(n)/SiC(w) nanocomposites

Mechanical properties and microstructure of a Si3N4/Ti3SiC2 multilayer composite