Abstract:Fracture behavior and mechanical properties of SiC nanofiber (SiCNF) reinforced SiC nanocomposites as influenced by the thickness of amorphous carbon (a-C) coatings are studied via molecular dynamics simulations using Tersoff potential. To simulate the condition that a matrix crack arrives at the interface between matrix and coating, a pre-setting matrix crack is created. Results show that the tensile stress-strain curve of nanocomposites without and/or with thin a-C coatings (e.g., t≤ 0.3 nm) demonstrates an abrupt drop after achieving a maximum value, while nonlinear tails appear in the curves of nanocomposites with thick a-C coatings (e.g., t >2.0 nm). It is demonstrated that the SiCNF is penetrated by the matrix crack when it is uncoated and/or coated by a thin a-C layer (t ≤ 0.3 nm) and the nanocomposite fails in a typical brittle mode; whereas the crack deflection path changes and the SiCNF is pulled out from the matrix when the a-C coatings are thick enough (e.g., 4 nm), showing a different fracture mode in nanocomposites. Compared to nanocomposites without an a-C coating, the tensile strength of nanocomposites with a-C coating of 4.0 nm thickness is about four times higher, and the fracture energy increases around an order of magnitude. Furthermore, the average stress concentration factor for SiCNF in nanocomposites, defined as the ratio of tensile strength of single SiCNF to the average stress of the nanofiber in the composite when it is broken, is extracted and shows a decreasing trend with increasing coating thickness, indicating that a-C coating can therefore be expected to simultaneously enhance the tensile strength and fracture energy of the SiCNF/SiC nanocomposites. This work sheds light on the toughening mechanism in SiCNF/C/SiC nanocomposites where a-C coating plays a significant role, indicating that the toughening mechanism in conventional ceramic matrix composites on a microscale is still valid on a nanoscale. Simulation results suggest that coating thickness in material design is efficient for engineering SiCNF/SiC nanocomposites with high strength and toughness.

Study on the fracture behavior and toughening mechanism of Si3N4/SiC(n)/SiC(w) nanocomposites

Strengthening-toughening Effect and Mechanism of Si_3N_(4p)-SiC_w/MoSi_2 Composite

Strengthening and toughening effect and its mechanism for Si3N4(p)/SiC(w)-MoSi2 composite

Study on Microstructures of Micron Si 3 N 4 Composite Ceramic with Addition of Nano SiC and SiC Whisker

Fracture and toughening mechanisms in SiC nanofiber reinforced SiC matrix nanocomposites with amorphous carbon coatings

Microstructure and mechanical properties of MoSi2-based composite strengthened and toughened by Si3N4(p) and SiC(w)

Study on the Fracture Behavior of SiCw/MB15 Composites

Fracture Behaviour of SiCp/Al Composites with Network Architecture

Molecular Dynamics Study on Tensile Behavior of Sic Nanofiber/C/Sic Nanocomposites

Strengthening Behavior in SiC Nanowires Reinforced Pure Al Composite

The overview of Al2O3/SiC nanocomposites II - Strengthening and toughening mechanism

Toughening Mechanisms of Al2O3-matrix Composites with SiC Whiskers

The Fracture Behaviors of Carbon Nanotube and Nanoscroll Reinforced Silicon Matrix Composites

Fracture toughness and toughening mechanisms of SiC whisker modified Ti(C, N)-based cermet

In-situ SEM observation of crack propagation of SiC whiskers reinforced Al-12Ti composites

Enhancing fracture toughness of silicon nitride ceramics by addition of β-Si3N4 whisker and MXene

Study of key technologies on whisker-reinforced ceramic matrix composites (Part III): design of in-situ fibrous monolithic structure and laminated structure

The properties of the multi-node SiCw and its reinforced Si 3N4 ceramic composite material

Strength and toughness improvement in a C/SiC composite reinforced with slurry-prone SiC whiskers

Effect of Graphene and SiC Whisker on the Mechanical Properties of WC-TiC-TiN-Al2O3 Nanocomposites

Effect of SiC Whiskers on the Bending Strength and Fracture Toughness of Ti(C,N) Based Cermets