Abstract:SiC-based composites have a wide range of applications in thermostructural filed. It is of great significance to accurately manufacture high-performance SiC whisker-reinforced SiC matrix composites (SiC w /SiC). Binder jetting (BJ) is an additive manufacturing method that can prepare complex-shaped whisker preforms in near-net-size. Reactive melt infiltration (RMI) method can prepare highly dense matrix without shrinkage of composites. Currently, the preparation technology of SiC w /SiC using the combination of BJ and RMI has the challenges of low whisker volume fraction, irrational whisker distribution, and high residual silicon content in matrix. A combination process of spray drying and chemical vapor infiltration (CVI) was developed to shape one-dimensional SiC w into SiC w composites microspheres (SiC w -CMS), which significantly improves the volume fraction and flowability of SiC w . Based on the SiC w -CMS, a novel hierarchical structural SiC w /SiC was designed. Also, through constructing reasonable infiltration channels of liquid silicon, the content of residual silicon in SiC w /SiC was reduced to 5.2 vol.%. As a result, the flexural strength and fracture toughness of the SiC w /SiC can reach 385 MPa and 5.93 MPa·m 1/2 , respectively. The SiC w /SiC also shows low coefficient of thermal expansion of 4.0-5.4 × 10 -6 K -1 , high thermal conductivity of 110.4 W/(m·K), and appropriate resistivity (7.09 Ω·cm). The hierarchical structural SiC w /SiC is expected to be a candidate for future thermal structural materials.

The properties of the multi-node SiCw and its reinforced Si 3N4 ceramic composite material

The properties of the multi-node SiCw and its reinforced Si3N4 ceramic composite material

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

Mechanical and Tribological Properties of SiC Whisker‐reinforced SiC Composites Via Oscillatory Pressure Sintering

Mechanical and tribological properties of SiC whiskers reinforced SiC composites via oscillatory pressure sintering

Mechanical Properties of SiC-Whisker-Reinforced MoSi<sub>2</sub> Composites

Fabrication and Mechanical Properties of SiCw(p)/SiC-Si Composites by Liquid Si Infiltration using Pyrolysed Rice Husks and SiC Powders as Precursors

Mullite-bonded SiC-whisker-reinforced SiC Matrix Composites: Preparation, Characterization, and Toughening Mechanisms

The Research of SiC<sub> </sub>and Si<sub>3</sub>N<sub>4 </sub>whiskers Reinforced Si<sub>3</sub>N<sub>4</sub> Composites to Improve Its Wear and Mechanical Properties

Preparation and Properties of Silicon Carbide Ceramics Enhanced by TiN Nanoparticles and SiC Whiskers

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Fabrication and performance of SiC-reinforced Cu: Role of the aspect ratio of the SiC reinforcement phase

Multifunction properties of SiOC reinforced with carbon fiber and in-situ SiC nanowires

Processing and Properties of Oriented SiC Whisker-Reinforced Si3N4 Ceramic Matrix Composites

The effect of whisker orientation in SiC whisker-reinforced Si3N4 ceramic matrix composites

Preparation and mechanical properties of SiC whisker-reinforced alumina

Tensile and Fracture Properties of Silicon Carbide Whisker-Modified Cement-Based Materials

Study on the fracture behavior and toughening mechanism of Si3N4/SiC(n)/SiC(w) nanocomposites

3D-SiC decorated with SiC whiskers: Chemical vapor infiltration on the porous 3D-SiC lattices derived from polycarbosilane-based suspensions

Processing and mechanical properties of B4C-SiCw ceramics densified by spark plasma sintering

Binder jetting additive manufacturing of hierarchical structural SiC w /SiC composites