Abstract:Molybdenum disilicide (MoSi2) is considered as a candidate material for high temperature structural applications, particularly in oxidizing environments. In the present study, SiC-whisker reinforcement has been applied to improve the mechanical properties such as fracture strength and fracture resistance at room temperature as well as creep resistance at elevated temperature. Almost dense SiC-whisker-reinforced MoSi2 composites containing up to 20vol% whisker were fabricated by hot-pressing at 1750°C. Due to the well-dispersed composite structure with fine grained matrix, the composites showed much higher bending strength than unreinforced materials; the average 4-point bending strength increased from 350MPa for MoSi2 to 870MPa for MoSi2-20%SiCw. The fracture resistance also considerably improved by the SiC-whisker reinforcement. The composites exhibited increasing R-curve behavior and the plateau values were about 23-34% higher compared to that of the unreinforced materials. Crack bridging was found to be mainly responsible for the toughening contribution. Creep resistance was remarkably increased by the suppression effect of SiC-whisker on the grain boundary sliding, which was confirmed to be an important deformation mechanism in MoSi2 polycrystals.

The properties of the multi-node SiCw and its reinforced Si3N4 ceramic composite material

The properties of the multi-node SiCw and its reinforced Si 3N4 ceramic composite material

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

Mechanical and Tribological Properties of SiC Whisker‐reinforced SiC Composites Via Oscillatory Pressure Sintering

Mechanical and tribological properties of SiC whiskers reinforced SiC composites via oscillatory pressure sintering

Mechanical Properties of SiC-Whisker-Reinforced MoSi<sub>2</sub> Composites

Mullite-bonded SiC-whisker-reinforced SiC Matrix Composites: Preparation, Characterization, and Toughening Mechanisms

Fabrication and Mechanical Properties of SiCw(p)/SiC-Si Composites by Liquid Si Infiltration using Pyrolysed Rice Husks and SiC Powders as Precursors

Preparation and Properties of Silicon Carbide Ceramics Enhanced by TiN Nanoparticles and SiC Whiskers

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Preparation and mechanical properties of SiC whisker-reinforced alumina

Tensile and Fracture Properties of Silicon Carbide Whisker-Modified Cement-Based Materials

Processing and Properties of Oriented SiC Whisker-Reinforced Si3N4 Ceramic Matrix Composites

The effect of whisker orientation in SiC whisker-reinforced Si3N4 ceramic matrix composites

Multifunction properties of SiOC reinforced with carbon fiber and in-situ SiC nanowires

Fabrication and performance of SiC-reinforced Cu: Role of the aspect ratio of the SiC reinforcement phase

The Research of SiC<sub> </sub>and Si<sub>3</sub>N<sub>4 </sub>whiskers Reinforced Si<sub>3</sub>N<sub>4</sub> Composites to Improve Its Wear and Mechanical Properties

Processing and mechanical properties of B4C-SiCw ceramics densified by spark plasma sintering

Fabrication and Mechanical Properties of SiCw/MoSi2–SiC Composites by Liquid Si Infiltration of Pyrolyzed Rice Husk Preforms with Mo Additions

Study on the fracture behavior and toughening mechanism of Si3N4/SiC(n)/SiC(w) nanocomposites

Synthesis of cBN-hBN-SiCw Nanocomposite with Superior Hardness, Strength, and Toughness