Abstract:TiC is widely used as an ideal reinforcement to strengthen titanium matrix composites (TMCs). The morphology, size and distribution of TiC and the interfacial structure of TiC-Ti are crucial to obtain good mechanical properties of titanium matrix composites. These are keys to achieve superior strength and good ductility in titanium matrix composites. Hence, we investigated the effects of TiC generated in situ from different carbon sources (i.e., amorphous carbon nanoparticles , reduced graphene oxide and graphene nanoparticles) on the interfacial structure and mechanical properties of Ti60 alloy. Amorphous carbon nanoparticles (ACNS), reduced graphene oxide (rGO) and graphene nanoparticles (GNPs) reinforced Ti60 composites were prepared using spark plasma sintering (SPS). Among the three carbon nanomaterials, ACNs and rGO reacted with Ti60 matrix to form TiC, facilitating interfacial bonding. GNPs were not completely reacted with Ti60 matrix and residual on the interface owing to its poor dispersion effect, resulting in interfacial structure defects . The mechanical properties of the ACNs/Ti60 and rGO/Ti60 composites are high than GNPs/Ti60 composites. The ultimate tensile strengths of ACNs/Ti60 composites were 1173.49 MPa, 702.96 MPa and 653.13 MPa at room temperature, 600 °C and 650 °C, respectively, improving by 17.63%, 14.13% and 16.21% over Ti60, respectively. The superior mechanical properties are attributed to the fact that ACNs and rGO are more easily dispersed in the Ti60 matrix. The reaction activity of ACNs and rGO are higher than GNPs, and more TiC phase content was formed after sintering. TiC formed a semi-coherent interface with the Ti60 matrix, promoting the interfacial bonding strength. It also played a role in grain refinement and load transfer effect. This work helps to further elucidate the reinforcement effect of TiC formed by different carbon nanomaterials on TMC.

Simultaneously enhancing the toughness and strength of cemented TiB 2 nanocomposites through doping SiC whisker and graphene

Nano-SiC whisker-reinforced Ti6Al4V matrix composites manufactured by selective laser melting: fine equiaxed grain formation mechanism and mechanical properties

High toughness Si3N4 ceramic composites synergistically toughened by multilayer graphene/β-Si3N4 whisker: Preparation and toughening mechanism investigation

Preparation and Properties of Silicon Carbide Ceramics Enhanced by TiN Nanoparticles and SiC Whiskers

Fabrication and mechanical properties of Al2O3–TiC ceramic composites synergistically reinforced with multi-walled carbon nanotubes and graphene nanoplates

Significantly improved strength of the TiC/TA19 composites via interface and dislocation strengthening

Effects of Ti on the Microstructural Evolution and Mechanical Property of the SiBCN-Ti Composite Ceramics

Synthesis of cBN-hBN-SiCw Nanocomposite with Superior Hardness, Strength, and Toughness

Simultaneously improving the strength and ductility of the as-sintered (TiB+La2O3)/Ti composites by in-situ planting ultra-fine networks into the composite powder

Superior strength-ductility combination in TiC/TC4 composites via In situ construction Ti 2 Cu nanoparticles

Toughening mechanisms of Ti3SiC2- and TiB2- toughened SiC matrix prepared via reactive melt infiltration

Strengthening and toughening of Ti 5 Si 3 by TiC-coated short carbon fiber: Fabrication, interfacial control, and mechanism of reinforcement

Effect of SiC Nano-Whisker Addition on WC–Ni Based Cemented Carbides Fabricated by Hot-Press Sintering

Fabrication and strengthening mechanism of dual-phased and bimodal-sized (Si3N4p + TiB2p)/6061Al hybrid composite

Study on the fracture behavior and toughening mechanism of Si3N4/SiC(n)/SiC(w) nanocomposites

Enhancing strength-ductility synergy in nano-sized TiB 2 /Al composite via rapid solidification and thermo-mechanical processing

Study on the toughening mechanism of in-situ synthesis (TixZr1−x)B2 in solid-state sintered SiC composite ceramics

Interfacial structures and strengthening mechanisms of in situ synthesized TiC reinforced Ti6Al4V composites by selective laser melting

Improvement of mechanical properties of Al2O3/Ti3SiC2 multilayer ceramics by adding SiC whiskers into Al2O3 layers

Effects of carbon nanomaterials on interfacial structure and mechanical properties of high temperature Ti matrix composites

Enhanced strength and toughness of SiC/C composite ceramics via SiC@graphene core–shell nanoparticles