Abstract:The near-net-shape characteristics of Additive Manufacturing offer significant advantages in fabricating SiCp/Al composite components. However, the high-temperature melt pool during the deposition process promotes an interface reaction between SiC and Al, forming Al4C3. Al 4 C 3 shortens the service life of SiC p /Al composite structural components, so it is critical to avoid its formation when preparing SiC p /Al composites via laser-directed energy deposition. This study prepared SiC p /Al composite components through coincident wire powder laser-directed energy deposition with Ti alloying, effectively preventing the formation of Al4C3 in AMC. Furthermore, it investigated the effect of Ti atoms on the microstructural evolution and strengthening mechanism. The results showed that the formation of large flake-like Al 4 C 3 was avoided without generating excess Al 3 Ti only when using an appropriate amount of Ti (Ti: SiC = 3: 10). After introducing Ti, Ti atoms in the melt pool migrated towards the SiC surface and reacted with C atoms (from the dissolution of SiC) and formed TiC. The resulting TiC enclosed the SiC particles in a thin film, preventing the further dissolution of SiC and inhibiting the generation of Al4C3. Additionally, some TiC nanoparticles dispersed within the matrix, serving as heterogeneous nucleation sites for Al, reducing the average equivalent circular grain radius from 38.10 μm to 7.20 μm. After Ti alloying, the average modulus and yield strength of AMC both increased. This increase was attributed to the load transfer energy of SiC particles, grain refinement of the matrix, and the dispersion-strengthening effect of TiC nanoparticles. An intrinsic relationship between the SiC-Al-Ti interfacial reaction and the mechanical properties of SiCp/Al composites has been established to provide theoretical guidance for eliminating Al4C3 phases in SiCp/Al composites prepared by laser-directed energy deposition, ensuring performance comparable to traditionally fabricated products.

Nano-SiC whisker-reinforced Ti6Al4V matrix composites manufactured by selective laser melting: fine equiaxed grain formation mechanism and mechanical properties

Interfacial structures and strengthening mechanisms of in situ synthesized TiC reinforced Ti6Al4V composites by selective laser melting

Microstructure evolution of SiC whisker-reinforced Ti6Al4V matrix composites manufactured by selective laser melting during heat treatment

Microstructure, solidification behavior and mechanical properties of Al-Si-Mg-Ti/TiC fabricated by selective laser melting

Microstructure evolution and mechanical properties of selective laser melting fabricated hybrid particle reinforced AlSi10Mg composites

In-situ synthesis of Ti<sub>5</sub>Si<sub>3</sub>-reinforced titanium matrix nanocomposite by selective laser melting: Quasi-continuous reinforcement network and enhanced mechanical performance

Investigation of Ti alloying for microstructural evolution and strengthening mechanism: Avoiding Al 4 C 3 formation in SiC p /Al composites via laser directed energy deposition

Simultaneously enhancing the toughness and strength of cemented TiB 2 nanocomposites through doping SiC whisker and graphene

Microstructure and mechanical properties of SiC reinforced AlSi10Mg composites fabricated by laser metal deposition

Microstructure characterization and mechanical properties of in situ synthesized Ti2(Al,Si)C reinforced Al composites

In situ formation of D022-Al3Ti during selective laser melting of nano-TiC/AlSi10Mg alloy prepared by electrostatic self-assembly

Enhanced ductility of Ti3AlC2 particles reinforced pure aluminum composites by interface control

Microstructure Evolution and Mechanical Behaviors of SiCp/CNTs Hybrid Reinforced Al-Si-Cu-Mg Composite by Semi-solid Stir Casting

Fabrication, microstructure and mechanical properties of TiAl matrix composite reinforced by submicro/nano-Ti 2 AlC

Influence of micron and nano SiCp on microstructure evolution and mechanical properties of laser metal deposition AlSi10Mg alloy

Microstructure and Mechanical Properties of Dual Scaled NbC/Ti2AlC Reinforced Titanium–Aluminum Composite

Mechanical and Tribological Properties of SiC Whisker‐reinforced SiC Composites Via Oscillatory Pressure Sintering

Preparation and Properties of Silicon Carbide Ceramics Enhanced by TiN Nanoparticles and SiC Whiskers

Microstructure, Mechanical Properties and Fracture Behavior of Micron-Sized TiB2/AlZnMgCu(Sc,Zr) Composites Fabricated by Selective Laser Melting

Selective laser melting processing of heterostructured Ti6Al4V/FeCoNiCrMo alloy with superior strength and ductility

Preparation and Mechanical Properties of SiC Whisker and Nanosized Mullite Particulate Reinforced TZP Composites