Abstract:By employing an in-situ reaction pressureless sintering method, self-reinforced and SiC-B4C-ZrB2 multiphase composites were successfully prepared. The effect of TiO2 and ZrO2 additions on the sintered density, microstructure, and mechanical properties of the composites was investigated. TiO2 and ZrO2 were completely transformed into TiB2 and ZrB2 phases during the sintering process, and their appropriate addition helped enhance the relative density of the composites. In the SiC-B4C-TiB2 (SBT) composite, the introduction of TiB2 facilitated grain growth in all phases. The composite with 12 vol% TiB2 (SBT12) exhibited optimal mechanical properties, with Vickers hardness, fracture toughness, and flexural strength reaching 30.1±0.8 GPa, 5.17±0.23 MPa·m1/2, and 491±24 MPa, respectively. In the SiC-B4C-ZrB2 (SBZ) composite, the presence of ZrB2 resulted in the formation of a ternary eutectic liquid phase, SiC-B4C-ZrB2, during the sintering process, leading to grain coarsening and the generation of plate-like SiC grains. Among them, the composite with 6 vol% ZrB2 (SBZ6) demonstrated the best overall performance, with Vickers hardness, fracture toughness, and flexural strength of 29.7±0.6 GPa, 6.17±0.36 MPa·m1/2, and 443±22 MPa, respectively. Additionally, SBZ9 exhibited the highest fracture toughness, reaching 6.43±0.44 MPa·m1/2, with the pull-out of plate-like grains considered as the primary contributing factor. This study provides a reference for the preparation of high-strength and tough SiC-B4C-MeB2 multiphase composites through low-temperature pressureless sintering.

Study on the toughening mechanism of in-situ synthesis (TixZr1−x)B2 in solid-state sintered SiC composite ceramics

Microstructure and mechanical properties of SiC composite ceramics modified by (TixZr1–x)B2 solid solution

Microstructure and mechanical behaviour of transient liquid phase spark plasma sintered B4C–SiC–TiB2 composites from a B4C–TiSi2 system

Preparation of TiB2–SiC composites toughened with interlocking microstructure by self-assembled TiB2 plates

The Effect of Tio2 and Zro2 Additives on the Density, Microstructure, and Mechanical Properties of Pressureless Sintered Sic-B4c

Toughened (ti0.2zr0.2hf0.2nb0.2ta 0.2)B2-Sic Composites Fabricated by One-Step Reactive Sintering with a Unique SiB6 Additive

Toughening mechanisms of Ti3SiC2- and TiB2- toughened SiC matrix prepared via reactive melt infiltration

Enhanced strength and toughness of SiC/C composite ceramics via SiC@graphene core–shell nanoparticles

Novel Ti3SiC2-(Ti, Zr)B2 Toughened (ti, Zr)C-based Composites with Enhanced Mechanical Properties Fabricated by Dual in Situ Reactions Hot-Pressing at Low Temperature

Microstructure and Thermal Shock Resistance of Zr7/8Ti1/8B2-20 Vol% SiC Composites Synthesized by Mechanical Alloying and Spark Plasma Sintering

Improved toughness of ZrB2–SiC composites with nanopowders obtained by mechanical alloying

The Fabrication and Mechanical Properties of SiC/ZrB2 Laminated Ceramic Composite Prepared by Spark Plasma Sintering

ZrB2–SiC–G Composite Prepared by Spark Plasma Sintering of In‐Situ Synthesized ZrB2–SiC–C Composite Powders

Spark plasma sintering of TiC-based composites toughened by submicron SiC particles

In situ reaction and solid solution induced hardening in (Ti,Zr)B 2 ‐(Zr,Ti)C composites

Microstructure evolution, enhanced hardness and toughness in the solid-solution ceramic composite by reaction pressureless sintering of ZrB2 and TiC powders

Microstructures and mechanical properties of in-situ SiC-TiB2 ceramic composites fabricated by reactive melt infiltration

Synthesis and Mechanical Properties of Sm2Zr2O7-ZrB2/SiC Composites

Bioinspired Tough and Strong ZrB2-SiCw/Ti–Nb–Ti Hybrid Composites with a Hierarchical Ceramic-Metal Architecture

In Situ Toughened Two-Phase B-12(C, Si, B)(3)-SiC Ceramics Fabricated Via Liquid Silicon Infiltration

Toughening mechanism of B4C/TiB2 ceramic materials by in situ reaction via spark plasma sintering