Abstract:Zirconia‐toughened alumina (ZTA) ceramics with high mechanical properties were sintered by hot‐pressing method using SiC particles (SiCp) and SiC whiskers (SiCw) as the reinforcing agents simultaneously. The influences of sintering temperature, SiCp and SiCw contents on the microstructure and mechanical properties of ZTA ceramics were investigated. It was found that both SiCp and SiCw could contribute to grain refinement significantly and promote the mechanical properties of the ceramics. However, the excess addition of SiCp or SiCw led to the formation of pores with large sizes and degraded the mechanical properties instead. When 13 wt% SiCp was introduced, the maximum flexural strength of 1180.0 MPa and fracture toughness of 15.9 MPa·m1/2 were obtained, whereas the maximum flexural strength of 1314.0 MPa and fracture toughness of 14.7 MPa·m1/2 were achieved at 20 wt% SiCw. Interestingly, the simultaneous addition of SiCp and SiCw could further improve the mechanical properties, and the highest flexural strength of 1334.0 MPa and fracture toughness of 16.0 MPa·m1/2 were achieved at a SiCw/SiCp ratio of 16/4. The reinforcement mechanisms in the ceramics mainly included the phase transformation toughening of ZrO2, the crack deflection and bridging of SiCp and SiCw and the pull‐out of SiCw.

Improvement of mechanical properties of Al2O3/Ti3SiC2 multilayer ceramics by adding SiC whiskers into Al2O3 layers

Synergistic Toughening Effect of SiC Whiskers and Particles in ZrO2–Al2O3–SiC Ceramics

Preparation, mechanical properties, and toughening mechanisms of SiCw/SiCp‐reinforced zirconia‐toughened alumina ceramics

Preparation and mechanical properties of SiC whisker-reinforced alumina

Preparation and Properties of Silicon Carbide Ceramics Enhanced by TiN Nanoparticles and SiC Whiskers

Preparation and Mechanical Properties of SiC Whisker and Nanosized Mullite Particulate Reinforced TZP Composites

Mechanical and Tribological Properties of SiC Whisker‐reinforced SiC Composites Via Oscillatory Pressure Sintering

Improved mechanical properties of reaction-bonded SiC through in-situ formation of Ti3SiC2

Mechanical Properties of Silicon Carbide Whisker-Reinforced Silicon Nitride Matrix Composites

Mechanical and tribological properties of SiC whiskers reinforced SiC composites via oscillatory pressure sintering

Strengthening mechanism of Al2O3–ZrO2–C sliding plate material by existence modes of in-situ generated β-SiC whiskers

Mechanical properties and microstructure of laminated Si3N4+SiCw/BN+Al2O3 ceramics densified by spark plasma sintering

Preparation of Al2O3/Ti3SiC2 multilayer materials by in-situ synthesis

The Effect of SiC Whisker on the Sintering and Thermal Shock Resistance Property of ZrO2-mullite Ceramic

Study on the mechanical properties and microstructure of Al2O3/nano-SiC multiphase ceramics

Mullite-bonded SiC-whisker-reinforced SiC Matrix Composites: Preparation, Characterization, and Toughening Mechanisms

Development of Whisker Toughening Ceramic Cutting Tool Composite by In Situ Synthesis Technology

Mechanical Properties of SiC-Whisker-Reinforced MoSi<sub>2</sub> Composites

Improved Mechanical Properties of Al2O3-25 Vol% SiCw Composites Prepared by Oscillatory Pressure Sintering

Microstructure and properties of silicon carbide whisker reinforced zirconium diboride ultra-high temperature ceramics

Fabrication and mechanical properties of ZrB2–SiCw ceramic matrix composite