Abstract:The mechanical properties of ceramic cutting tool materials can be modified by introducing proper content of nanoparticles or whiskers. However, the process of adding whiskers or nanoparticles has the disadvantages of high cost and health hazard as well as the agglomeration; although a new in-situ two-step sintering process can solve the above problems to some extent, yet the problems of low conversion ratio of the raw materials and the abnormal grain growth exist in this process. In this paper, an in-situ one-step synthesis technology is proposed, which means the growth of whiskers or nanoparticles and the sintering of the compact can be accomplished by one time in furnace. A kind of Ti(C, N)-based ceramic cutting tool material synergistically toughened by TiB2 particles and whiskers is fabricated with this new process. The phase compositions, relationships between microstructure and mechanical properties as well as the toughening mechanisms are analyzed by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM). The composite which is sintered under a pressure of 32 MPa at a temperature of 1700°C in vacuum holding for 60 min can get the optimal mechanical properties. Its flexural strength, fracture toughness and Vickers hardness are 540 MPa, 7.81 MPa · m1/2 and 20.42 GPa, respectively. The composite has relatively high density, and the in-situ synthesized TiB2 whiskers have good surface integrity, which is beneficial for the improvement of the fracture toughness. It is concluded that the main toughening mechanisms of the present composite are whiskers pulling-out and crack deflection induced by whiskers, crack bridging by whiskers/particles and multi-scale particles synergistically toughening. This study proposes an in-situ one-step synthesis technology which can be well used for fabricating particles and whiskers synergistically toughened ceramic tool materials.

Development of Whisker Toughening Ceramic Cutting Tool Composite by In Situ Synthesis Technology

In Situ Synthesis Process for Tic Whisker Toughening Al2o3-Based Ceramic Cutting Tool Composite

Preparation and Performance of TiC Whisker Toughening Alumina Ceramic Cutting Tool Composite

Preparation and mechanical properties of in situ growth TiC whiskers toughening Al2O3 ceramic matrix composite

Toughening Mechanisms and Wear Behavior of a TiC Whisker Toughening Alumina Ceramic Cutting Tool Composite

In-situ Fabricated TiB 2 Particle-whisker Synergistically Toughened Ti（C,N）-based Ceramic Cutting Tool Material

Fabrication and Mechanical Properties of Al2O3-SiCw-TiCnp Ceramic Tool Material

Preparation of In-Situ Growth TaC Whiskers Toughening Al2O3 Ceramic Matrix Composite

Microstructure and Mechanical Properties of Al2o3-Tacw Ceramic Cutting Tool Materials

Study on Fracture Performance of In-Situ Growth Whisker Toughened Composite Ceramic Tool

Synergistically Toughening Effect of Sic Whiskers and Nanoparticles in Al2o3-Based Composite Ceramic Cutting Tool Material

Mechanical Properties and Toughening Mechanisms of Ceramic Composites

Microstructure and Mechanical Properties of Al<sub>2</sub>O<sub>3</sub>-TaC<sub>w</sub> Ceramic Cutting Tool Materials

Processing and characterization of an Al2O3/WC/TiC micro- nano-composite ceramic tool material

Development of advanced composite ceramic tool material

Toughening mechanisms taking into account growth kinetics of SiC whiskers for bionic ceramic cutting tool materials

Toughening Mechanisms of Al2O3-matrix Composites with SiC Whiskers

Developing High Toughness and Strength Al/TiC Composites Using Ice-Templating and Pressure Infiltration

Self-lubricating ceramic tool materials synergistically toughened by nano-coated particles and silicon carbide whiskers

High temperature mechanical properties of Al2O3-based ceramic tool material toughened by SiC whiskers and nanoparticles

Fabrication and Performance of an Advanced Ceramic Tool Material