Abstract:Materials with high specific strength and toughness are urgently needed in the fields of electronic packaging, armor, and aerospace. SiC/Al composites show good potential for these applications but the problem of mutual exclusion of strength and toughness still needs to be solved. Herein, we propose a new strategy to simultaneously enhance its strength and toughness from the perspective of structural optimization and interface enhancement. Inspired by the nacre structure, a 3D-(SiC-Si3N4)/Al co-continuous composite was prepared by freeze-casting combined with the pressure infiltration method. During the process, elongated Si3N4 grains were introduced into the ceramic framework to design the internal lamella wall structure and increase the contact area with the aluminum substrate. Moreover, a favorable interfacial bonding was designed between Si3N4 and Al to improve interface wettability. The reliable microstructure of porous 3D-(SiC-Si3N4) preform was tailored through the adjustment of initial solid loading and the alpha-Si3N4 component. The effects of initial solid loading and the alpha-Si3N4 component on the microstructure, interfacial wettability, and mechanical properties of the final composites were investigated. The results showed that the SiC-Si3N4/Al composites possess high flexural strength (769 MPa) and fracture toughness (15.1 MPa m1/2), which is superior to data reported in general literature. Numerous elongated beta-Si3N4 grains are produced on the ceramic skeleton, forming an interlocking structure with the aluminum matrix, which increases the contact area with the aluminum substrate. A chemical reaction layer was formed at the interface of the composite, greatly improving the interfacial bonding strength. This work provides a promising design guideline for developing and optimizing high-strength and tough composite.

Study of key technologies on whisker-reinforced ceramic matrix composites (Part III): design of in-situ fibrous monolithic structure and laminated structure

Reinforcement mechanisms and optimum design of laminated ceramic composites

Study of Key Technologies on Whisker-Peinforced Ceramic Matrix Composites (Part Ⅰ): Adjusting Grain Boundary and Interfacial Phase

High toughness Si3N4 ceramic composites synergistically toughened by multilayer graphene/β-Si3N4 whisker: Preparation and toughening mechanism investigation

Toughening Mechanisms of Al2O3-matrix Composites with SiC Whiskers

Mechanical Properties and Toughening Mechanisms of Si3n4 Matrix Laminated Ceramic Composite

Mechanical Properties and Toughening Mechanisms of Ceramic Composites

Mechanical Properties and Toughening Mechanisms of Si 3 N 4 Matrix Laminated Ceramic Composite

The effect of whisker orientation in SiC whisker-reinforced Si3N4 ceramic matrix composites

Processing and Properties of Oriented SiC Whisker-Reinforced Si3N4 Ceramic Matrix Composites

Mullite-bonded SiC-whisker-reinforced SiC Matrix Composites: Preparation, Characterization, and Toughening Mechanisms

Biomimetic structure design — a possible approach to change the brittleness of ceramics in nature

Control of Composition and Structure in Laminated Silicon Nitride/Boron Nitride Composites

Study on the fracture behavior and toughening mechanism of Si3N4/SiC(n)/SiC(w) nanocomposites

Fabrication and characterization of SiC whisker reinforced reaction bonded SiC composite

Macro-micro-nano Multistage Toughening in Nano-Laminated Graphene Ceramic Composites

Interface Structure and Mechanical Properties of Al2O3–20vol%SiCw Ceramic Matrix Composite

Strong and Tough 3D-(Sic-si3n4)/al Co-Continuous Composite with Enhanced Interfaces

Fabrication of novel alumina composites reinforced by SiC nano-particles and multi-walled carbon nanotubes

Influence of Toughening Method on Microstructures and Mechanical Properties of Alumina-Matrix Composites

Development of Whisker Toughening Ceramic Cutting Tool Composite by In Situ Synthesis Technology