Abstract:Ceramic-metal laminated composites consisting of alternating ceramic and metal micro-layers can create unique "structural or composite properties" superior to the material properties of individual constituent ceramics and metals. Those unique "composite or structural properties" cannot be adequately modeled by Linear Elastic Fracture Mechanics (LEFM) or Strength of Materials (SoM) since both models are limited to homogeneous materials. A recent composite fracture model with an approximate empirical solution is adopted in this study to determine both the "structural or composite" tensile strength and fracture toughness of micro-layered Al2O3-Ni laminar composites, which were prepared through gel-casting and hot-pressing. This simple empirical model considers the micro-cracking or damage zone in the highly stressed region, e.g. at notch tip, and the most prominent composite microstructure, i.e. the thickness C-ch of ductile Ni micro-layers. A linear relation between the maximum fracture loads P-max and the equivalent area A(e) was confirmed with the "structural or composite" tensile strength f(t) as the slope. The "structural or composite" fracture toughness KIC was then determined by f(t) and C-ch. This simple empirical model can also be used together with normal distribution so that both the mean and 95% reliability band can be predicted. The "structural or composite" properties determined by the simple composite fracture model were compared with rough approximations from LEFM and SoM (both should not be used for composites) so that readers can see the errors if those classic models suitable only to homogeneous materials are used.

Reinforcement mechanisms and optimum design of laminated ceramic composites

Cost-effective Fabrication of Bio-Inspired Nacre-Like Composite Materials with High Strength and Toughness

Structure Design, Fabrication, Properties of Laminated Ceramics: A Review

Design and Experimental Investigation of Laminated Ceramic Composites with High Strength

Study of key technologies on whisker-reinforced ceramic matrix composites (Part III): design of in-situ fibrous monolithic structure and laminated structure

A NUMERICAL SIMULATION AND EXPERIMENTAL STUDY ON TOUGHENING DESIGN OF MULTILAYER CERAMIC

MECHANICAL PROPERTIES AND OPTIMAL ANALYSIS ON VARIOUS LEVEL MICRO-COMPOUNDED CERAMIC COMPOSITE

Tailoring the toughening effects in two-dimensional nanomaterial-reinforced ceramic matrix composites

Research Progress of Laminated Composite Ceramic Cutting Tools

Macro-micro-nano Multistage Toughening in Nano-Laminated Graphene Ceramic Composites

Biomimetic structure design — a possible approach to change the brittleness of ceramics in nature

Optimal Composition Design on Seveval DispersionReinforced Ceramic Composites

Design of particulate strengthened ceramics

3D printing of layered ceramic/carbon fiber composite with improved toughness

Fractural Process and Toughening Mechanism of Laminated Ceramic Composites

Strengthening/Toughening Of Laminated (Sicw+Sicp)/Sic Ceramic Composites

Lamellar and Interpenetrated Al/(Al2O3–TiC) Composites Prepared by Bidirectional Freeze Casting and Melt Infiltration

Control of Composition and Structure in Laminated Silicon Nitride/Boron Nitride Composites

THE MICROSTRUCTURE AND THE PROPERTY OF SiC/Si LAMINATED CERAMIC COMPOSITES FROM PAPER

Toughening By Multiple Mechanisms In Ceramic-Matrix Composites With Discontinuous Elongated Reinforcements

A Study on the Failure Behavior of Al2O3-Ni Micro-Layered Beams under Three Point Bending