Abstract:Materials with high specific strength and toughness are urgently needed in the fields of electronic packaging, armor, and aerospace. SiC/Al composites show good potential for these applications but the problem of mutual exclusion of strength and toughness still needs to be solved. Herein, we propose a new strategy to simultaneously enhance its strength and toughness from the perspective of structural optimization and interface enhancement. Inspired by the nacre structure, a 3D-(SiC-Si3N4)/Al co-continuous composite was prepared by freeze-casting combined with the pressure infiltration method. During the process, elongated Si3N4 grains were introduced into the ceramic framework to design the internal lamella wall structure and increase the contact area with the aluminum substrate. Moreover, a favorable interfacial bonding was designed between Si3N4 and Al to improve interface wettability. The reliable microstructure of porous 3D-(SiC-Si3N4) preform was tailored through the adjustment of initial solid loading and the alpha-Si3N4 component. The effects of initial solid loading and the alpha-Si3N4 component on the microstructure, interfacial wettability, and mechanical properties of the final composites were investigated. The results showed that the SiC-Si3N4/Al composites possess high flexural strength (769 MPa) and fracture toughness (15.1 MPa m1/2), which is superior to data reported in general literature. Numerous elongated beta-Si3N4 grains are produced on the ceramic skeleton, forming an interlocking structure with the aluminum matrix, which increases the contact area with the aluminum substrate. A chemical reaction layer was formed at the interface of the composite, greatly improving the interfacial bonding strength. This work provides a promising design guideline for developing and optimizing high-strength and tough composite.

Design and Experimental Investigation of Laminated Ceramic Composites with High Strength

Research on structural design and anti-penetration performance of ceramic composite armor

Reinforcement mechanisms and optimum design of laminated ceramic composites

Experiment and numerical simulation of anti-penetration performance of composite structures

3D printing of layered ceramic/carbon fiber composite with improved toughness

A NUMERICAL SIMULATION AND EXPERIMENTAL STUDY ON TOUGHENING DESIGN OF MULTILAYER CERAMIC

Strong and Tough ZrB2 Materials Using a Heterogeneous Ceramic-Metal Layered Architecture

Experimental and Numerical Investigation of the Toughening Mechanisms in Bioinspired Composites Prepared by Freeze Casting

Laminated ZrB2–SiC/graphite Ceramics with Simultaneously Improved Flexural Strength and Fracture Toughness

Structure Design, Fabrication, Properties of Laminated Ceramics: A Review

Design of Alumina-Zirconia Composites with Spatially Tailored Strength and Toughness

Strong and Tough Laminated Ceramics Prepared from Ceramic Foams

Research Progress and Toughening Mechanisms in Al_2O_3 Composite Ceramic

Strong and Tough 3D-(Sic-si3n4)/al Co-Continuous Composite with Enhanced Interfaces

Toughness Mechanism of Layered ZrB2 Based Composite Ceramic

Laminated ZrB2–SiC Ceramic with Improved Strength and Toughness

Conch-shell-inspired porcelain ceramic tile/Kevlar fabric composites with excellent combination of strength, toughness and shock resistance

Enhanced Mechanical Properties in Ceramic Multilayer Composites Through Integrating Crystallographic Texture and Second-Phase Toughening

Preparation and Mechanical Properties of Al2O3/Al Laminated Ceramic Matrix Composites

Fabrication and mechanical properties of Al2O3-Si3N4/ZrO2-Al2O3 laminated composites

Lamellar and Interpenetrated Al/(Al2O3–TiC) Composites Prepared by Bidirectional Freeze Casting and Melt Infiltration