Abstract:Ceramic materials are highly regarded for their exceptional chemical and mechanical stability; however, their inherent brittleness limits their resistance to impact fractures. Researchers have investigated the design of biomimetic ceramic structures to overcome this problem, demonstrating the ability to toughen ceramics and expand their applications. However, the complexity of these structures makes the implementation of traditional processing methods challenging. To address this problem, a new preparation method for high-strength and high-toughness biomimetic ceramic structures is proposed. First, the primitive structure with the best mechanical performance was selected as the experimental object. Second, the vat photopolymerization printing process was optimized; further, primitive structures were designed with different wall thicknesses to investigate the effects of graded and variable-graded structures on the performance of triply periodic minimal surface structures. Finally, a polymer was used to impregnate the ceramic parts to prepare biomimetic structures. In the experiments, the biomimetic structures outperformed their pure ceramic counterparts in terms of toughness and avoided catastrophic failure. In particular, when the ceramic had graded structures, the energy absorption capability of the part increased by 202%. Finite-element modeling was used to analyze the stress concentration and distribution. Peridynamic simulations provided insights into the strengthening and toughening mechanisms at the micro level and guidance for developing damage-resistant, high-energy-absorbing materials.

Facile method for preparing lamellar structured alumina-zirconia ceramics with high toughness

A novel method for fabricating brick-mortar structured alumina-zirconia ceramics with high toughness

Cost-effective Fabrication of Bio-Inspired Nacre-Like Composite Materials with High Strength and Toughness

Fabrication and Characterisation of Alumina/aluminium Composite Materials with a Nacre-Like Micro-Layered Architecture

Ultralight and High-Strength Bulk Alumina/zirconia Composite Ceramic Foams Through Direct Foaming Method

Strong and Tough Laminated Ceramics Prepared from Ceramic Foams

Strong and Tough Alumina Ceramic from the Particle‐Stabilized Foam

Ultra-high Strength ZTA Ceramic Foams with Large Amounts of Intragranular Structures Resulting from Dual-Phase Sol

Foam structure-derived strong and tough alumina ceramics with fine grains and transgranular fracture

Towards high strengthening efficiency of equiaxed and platelet-shaped alumina reinforced zirconia ceramics with textured microstructure using DLP-based stereolithography

Ultrahigh‐strength Alumina Ceramic Foams Via Gelation of Foamed Boehmite Sol

Preparation, mechanical properties, and toughening mechanisms of SiCw/SiCp‐reinforced zirconia‐toughened alumina ceramics

Zirconia Ceramics Consolidated by Oscillatory Pressure Sintering and Subsequent Carburization

Enhanced Mechanical Properties in Ceramic Multilayer Composites Through Integrating Crystallographic Texture and Second-Phase Toughening

Fabrication and Mechanical Properties of Homogeneous Zirconia Toughened Alumina Ceramics Via Cyclic Solution Infiltration and in Situ Precipitation

Fabrication of alumina ceramics with high flexural strength using stereolithography

Synthesis, Evaluation And Characterization Of Alumina Ceramics With Elongated Grains

Highly Porous Alumina Cellular Ceramics Bonded by In-Situ Formed Mullite Prepared by Gelation-Assisted Al2O3–Si Particle-Stabilized Foams

Method for preparing biomimetic ceramic structures with high strength and high toughness

Ultrahigh-Strength Porous Ceramic Composites via a Simple Directional Solidification Process

Continuous alumina fiber-reinforced yttria-stabilized zirconia composites with high density and toughness