Abstract:The solidification behaviours and microstructural characteristics of both ZA27/SiCp composites and monolithic ZA27 alloy were studied by using differential scanning calorimetry, scanning electron microscopy, transmission electron microscopy, electron probe microanalysis, and X-ray diffraction, It was found that there were differences in the transformation temperature and volume fraction of the phases, although the solidification process was almost identical for the composite and the monolithic alloy. The incorporation of SiC particles in the ZA27 alloy led to slight refinement of primary grains and reduced volume fraction of eutectic-like phase. The SiC particles obstructed Zn diffusion in the residual melt during the formation of proeutectic beta phase, but promoted Zn diffusion from alpha (Al) to eta (Zn) phase during eutectoid transformation. During solidification, Cu was mainly segregated in the final solidification regions; Mg was present not only in the matrix but also on SiC particles; and oxide inclusions were mainly distributed around SiC particles, The matrix microstructure for both materials mainly consisted of primary cores of Al rich alpha + eta eutectoid; beta' phase resulting from the eutectoid transformation of the proeutectic beta phase; and Zn rich alpha + eta eutectoid resulting from the eutectoid transformation of the eutectic-like phase. The SiC particles were mainly distributed around the primary grains, Several new phases based on the Al-Zn-Mg-Cu system and interfacial reaction products, including Al21Fe3Si, Cu5Zn8, Mg6Cu3Al7, MgAl2O4, and amorphous oxide inclusions, were identified in the final solidification regions. The nucleation of both primary alpha phase and eutectic-like alpha + eta phase at the surface of SIC particles and their crystallographic orientation relationships were investigated theoretically and experimentally. No distinct crystallographic orientation relationship between the matrix and SiC has been identified, although the mismatch between (0001)(SiC) and (111)(alpha) was calculated to be as small as 7.6%.

A study of interface reaction zone in a SiC fibre/Ti-17 composite

Microstructural Characterization of a Cf/ZrC Composite Manufactured by Reactive Melt Infiltration

Fine study of hierarchical interphase constructed by Ti3SiC2 and carbon nanotubes in SiCf/SiC composites

Study on toughening mechanisms of pyrolytic carbon interface layer in Cf/ZrB2-SiC composites using in-situ tensile experimental and numerical methods

Microstructural development of a Cf/ZrC composite manufactured by reactive melt infiltration

Interfacial Reactions and Mechanical Properties Studies of C-Coated and C/B4C Duplex-Coated SiC Fiber-Reinforced Ti2AlNb Composites

Characterisation of interfacial bonding in Al2O3 coated SiC whisker reinforced TZP composites

Feasibility study of ZrSiO4 as matrix and fiber interphase of SiC/SiC composite

Interfacial reactions between polymer derived SiC fiber and Ti 3Si(Al)C2

Microstructure and Interfacial Strength of SiC Fiber-Reinforced Ti17 Alloy Composites with Different Consolidation Temperatures

Microstructure and Ablation Performance of SiC–ZrC Coated C/C Composites Prepared by Reactive Melt Infiltration

Interfacial behaviors and mechanism of ZrC-SiC composite and Ti system under pulsed electric current

Damage Mechanism Analysis to the Carbon Fiber and Fiber-Ceramic Interface Tailoring of Cf/ZrC-SiC Using PyC Coating

Interfacial Reactions Between Polymer Derived SiC Fiber and Ti<sub>3</sub>Si(Al)C<sub>2</sub>

PyC interphase growth mechanism and control models of C/SiC composites

Solidification and microstructure of ZA27/SiCp composite fabricated by mechanical-electromagnetic combination stirring process

In-situ formed TiCx reinforced Ti composites derived from polyzirconocarbosilane precursor: Synthesis, characterization and mechanical properties

Investigations of interfacial reaction and toughening mechanisms of Ta fiber-reinforced TiAl-matrix composites

Wetting and brazing of Cf/C composites with Si–Zr eutectic alloys: The formation of nano- and coarse-SiC reaction layers

The interface-layer and interface in the Al2O3/Ti3SiC2 multilayer composites prepared by in situ synthesis

Study of Interfacial Stress Distribution in SiC Fiber Reinforced Titanium Matrix Composites on Transverse Tensile Tests