Abstract:Although numerical simulation accuracy makes progress rapidly, it is in an insufficient phase because of complicated phenomena of the filling process and difficulty of experimental verification in high pressure die casting (HPDC), especially in thin-wall complex die-castings. Therefore, in this paper, a flow visualization experiment is conducted, and the porosity at different locations is predicted under three different fast shot velocities. The differences in flow pattern between the actual filling process and the numerical simulation are compared. It shows that the flow visualization experiment can directly observe the actual and real-time filling process and could be an effective experimental verification method for the accuracy of the flow simulation model in HPDC. Moreover, significant differences start to appear in the flow pattern between the actual experiment and the Anycasting solution after the fragment or atomization formation. Finally, the fast shot velocity would determine the position at which the back flow meets the incoming flow. The junction of two streams of fluid would create more porosity than the other location. There is a transition in flow patterns due to drag crisis under high fast shot velocity around two staggered cylinders, which resulted in the porosity relationship also changing from R1 < R3 < R2 (0.88 m/s) to R1 < R2 < R3 (1.59 and 2.34 m/s).

Calculation and Experiment on Cavity Vacuum Pressure in Vacuum Die Casting Process

Prediction method of shrinkage cavity and shrinkage porosity in solidification process under low-pressure casting

Study on vacuum die casting process of aluminum alloys

Effects of Vacuum Die Casting Processing Parameters on Mechanical Properties of AM50 Magnesium Alloy

Comparison Experiments on Evacuating Capability of a High Vacuum Valve and a Zig-Zag Valve in Vacuum Die Casting Process

Application of Vacuum and Partial Pressurization in Die Casting Automobile Components

Study on Pressure Variations in the Mold of Magnesium Alloy Die Castings

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Effect of Vacuum on Porosity and Mechanical Properties of High-Pressure Die-Cast Pure Copper

Optimization of vacuum counter-pressure casting process for an aluminum alloy casing using numerical simulation and defect recognition techniques

Finite element analysis for die casting parameters in high-pressure die casting process

Die-Casting Die Design Based on the Application of Cae Simulation

Cavity Pressure and Dimensional Accuracy Analysis of Wax Patterns for Investment Casting

Relationship Between Porosity Distribution and Mechanical Properties of Vacuum Die Casting AM50 Magnesium Alloy

Research on Quality Characterization Method of Micro-Injection Products Based on Cavity Pressure

Effect of Vacuum Degree in Magnesium Alloy Vacuum Die Casting on Gas Porosity Ratio Based on Numerical Simulation

Processing Parameters of LFC Shell Mold Casting Aluminum Alloy Castings with Vacuum and Low Pressure

Optimization of Gating System Design for Die Casting of Thin Magnesium Alloy-Based Multi-Cavity LCD Housings

Comparative Study of the Cavity Pressure of Magnesium Alloy and Aluminium Alloy During Die Casting Process

Direct Observation of Filling Process and Porosity Prediction in High Pressure Die Casting

Study on Mechanical Properties of Vacuum Die-cast AZ91D Magnesium Alloy