Abstract:Purpose – High pressure die casting is a widely used industrial process to manufacture complex-shaped products in light alloys. Virtual prototyping techniques, especially numeric-based simulations of the casting process, allow the die filling process to be evaluated and help faster optimization of the gating system, which is the most critical element of the mould. The purpose of this paper is to present a four step approach to design optimal moulds taking advantage of the simulation tools. Design/methodology/approach – No formalized method to design an optimal gating system is available yet and the majority of the studies aim to optimize existing geometries or to choose from alternative solutions. Rather than optimizing the geometries of predefined designs by running attempt trials, the proposed approach defines a procedure to position cavities, gating systems and, finally, to determine the whole mould geometry. Findings – The approach is demonstrated through three different industrial applications. The design of a six-cavity mould for gas cooking burners is reported at first. Then, two test cases, a cup and a radiator, are reported for showing different arrangements of the gating system. The reached quality of the mould design has been assessed using metallographic analyses of the casts. Originality/value – The design of a mould is strictly correlated to its product and mainly based on a trial-and-error approach. Numerical simulations offer a powerful and not expensive way to study the effectiveness of different die designs and filling processes. The paper proposes a structured approach for the definition of the gating system. It ultimately leads to improvements in both product quality and process productivity, including more effective control of the die filling and die thermal performance.

Application of Vacuum and Partial Pressurization in Die Casting Automobile Components

Process Optimization of Low-pressure Die Casting of Aluminum Alloy Wheel based on Taguchi Method

Effect of Vacuum on Porosity and Mechanical Properties of High-Pressure Die-Cast Pure Copper

Effects of Process Parameters on Shrinkage Porosity in 357 Semi-Solid Die Casting Parts

Calculation and Experiment on Cavity Vacuum Pressure in Vacuum Die Casting Process

Prediction method of shrinkage cavity and shrinkage porosity in solidification process under low-pressure casting

A feasibility study of the partial squeeze and vacuum die casting process

Effects of Process Parameters on Internal Quality of Castings During Novel Casting

Finite element analysis for die casting parameters in high-pressure die casting process

Die-Casting Die Design Based on the Application of Cae Simulation

Effect of different processing parameters on interfacial heat-transfer behavior in high-pressure die-casting process

Innovative Hybrid High-Pressure Die-Casting Process for Load-Bearing Body-In-White Structural Components

Optimization of low-pressure die casting process parameters for reduction of shrinkage porosity in ZL205A alloy casting using Taguchi method

Effects of Vacuum Die Casting Processing Parameters on Mechanical Properties of AM50 Magnesium Alloy

Effect of Vacuum Degree in Magnesium Alloy Vacuum Die Casting on Gas Porosity Ratio Based on Numerical Simulation

Mechanism and Application of A Newly Developed Pressure Casting Process: Horizontal Squeeze Casting

Effect of Oxygen Injections on the Porosity of High Pressure Die Castings

Virtual prototyping in the design process of optimized mould gating system for high pressure die casting

Influence of Decreasing Speed Technology and Decreasing Pressure Technology on Quality and Properties of Magnesium Alloy Die Castings

Vacuum Die Casting Technology of Aluminum Alloy Automotive Steering Gear Housing

Effect of Vacuum Degree on Quality of Magnesium Alloy by Low-Pressure Expendable Pattern Casting