Abstract:Compared with traditional liquid and solid processing methods, semi-solid die casting process can apparently overcome shrinkage cavity and porosity defects in castings and high deformation resistance and high residual stress shortcomings in forging parts. Semi-solid die casting process with advantages such as high efficiency and low cost, will become the optimal process for high quality automobile parts. In this study, using the clamp as an example, the author introduced product structure optimization and die design for semi-solid die-casting process of aluminum alloy in a new product development.The Computer Aided Engineering technology was applied to the product structure optimization according to the stress analysis. The optimal mold structure, including cavity layout, gating system, overflow and vent systems, were confirmed based on the die design criteria for traditional die casting, combining with the characteristics of semi-solid forming and the simulation results. The semi-solid aluminum alloy clamp parts with excellent performances were finally developed successfully by means of product structure optimization, die design, parameters optimization of die casting process, and the mechanical properties test of products.The existing parts were optimized to make them more suitable for semi-solid die casting processing. In addition, a reasonable die design specially for semi solid processing was an important guarantee for a successful semi solid product applied in industry. Computer numerical simulation was applied in product structure design for semi-solid die casting, die design, die-casting process optimization and other aspects, to shorten the development cycle of new product, reduce cost and improve efficiency.

A feasibility study of the partial squeeze and vacuum die casting process

Experimental study of squeeze casting of ZK60 magnesium alloy

Numerical Simulation and Optimization of Indirect Squeeze Casting Process

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

The molding analysis of automobile parts using the die-casting system

Development of Semi-Solid Die Casting Process Technology for Aluminium Alloy Clamp

Effects of Process Parameters on Shrinkage Porosity in 357 Semi-Solid Die Casting Parts

Numerical Simulation and Experimental Validation of Squeeze Casting of AlSi9Mg Aluminum Alloy Component with a Large Size

Study on Microstructure Distribution of Al-Cu-Mg Alloy in Squeeze Casting Process

Mechanism and Application of A Newly Developed Pressure Casting Process: Horizontal Squeeze Casting

Research on the squeeze casting process of large wheel hub based on FEM and RSM

Effects of Vacuum Die Casting Processing Parameters on Mechanical Properties of AM50 Magnesium Alloy

Optimization of Gating System Design for Die Casting of Thin Magnesium Alloy-Based Multi-Cavity LCD Housings

Computer-Aided Designs Of Die And Thermal Control For Fabrication Of A356 Wheels

Production of Aluminum Alloy Sealing Part by Semi Solid Die Casting Method

Numerical Simulation and Experimental Investigation of Microstructure Evolution and Flow Behavior in the Rheological Squeeze Casting Process of A356 Alloy

The effect of squeeze casting process on the microstructure, mechanical properties and wear properties of hypereutectic Al–Si–Cu–Mg alloy

Study on a Semi-Solid Rheo-Diecasting Process With AZ91D Alloy Slurry

Study and Application of Cae Simulation in Die-Casting Die Design

Study on vacuum die casting process of aluminum alloys

Die-Casting Die Design Based on the Application of Cae Simulation