Abstract:In this study, a new casing process named expendable pattern shell casting process with vacuum and low pressure (EPSC-VL) was introduced to produce complicated and thin-walled aluminum alloy castings. The gas flowrate is one of the most important process parameters for manufacturing castings during the EPSC-VL process. In the present work, the influence of gas flowrate on the filling ability and internal quality of A356 aluminum alloy castings fabricated by the EPSC-VL process were investigated. Moreover, the filling ability, internal quality, as well as mechanical properties of A356 aluminum alloy castings obtained by EPSC-VL and lost foam casting (LFC) processes were also compared. The results obtained suggested that the filling length increased with the increase of gas flowrate, and the filling length of the thick section was larger than that of the thin section under the same gas flowrate when the gas flowrate was less than 19 m(3)/h. Furthermore, the porosity of castings decreased with increasing gas flowrate, and the microstructure of castings became denser, and the internal quality of castings was obviously improved. The comparison experiments showed that the EPSC-VL process had superior filling ability, internal quality, and mechanical properties compared with the LFC process, and the surface quality of castings obtained by EPSC-VL process was also better than that of the LFC process. The casting practice of complicated and thin-walled A356 aluminum alloy intake manifold part also suggested that the EPSC-VL process had an obvious advantage for the fabrication of complicated and thin-walled aluminum alloy castings compared with the LFC process.

Effect of Oxygen Injections on the Porosity of High Pressure Die Castings

Effects of Process Parameters on Internal Quality of Castings During Novel Casting

Influences of Die Casting Parameters on the Porosity in Aluminum Alloy Air-conditioning Compressor Cylinder

The effect of different high pressure die casting parameters on 3D microstructure and mechanical properties of AE44 magnesium alloy

Influence of Slow-Shot Speed on PSPs and Porosity of AlSi17Cu2.5 Alloy During High Pressure Die Casting

High-pressure die casting process optimization for improving shrinkage porosity and air entrainment in carburetor housing with aluminum alloy using Taguchi-based ProCAST simulation and MADM-based overall quality index

Study on the Influence of Injection Velocity on the Evolution of Hole Defects in Die-Cast Aluminum Alloy

Using Micro-CT Scanning to Quantitative Characterize Porosity in High Pressure Die Castings and Semi-Solid Castings

The Effect of Slow Shot Speed and Casting Pressure on the 3D Microstructure of High Pressure Die Casting AE44 Magnesium Alloy

Effects of Process Parameters on Shrinkage Porosity in 357 Semi-Solid Die Casting Parts

Direct Observation of Filling Process and Porosity Prediction in High Pressure Die Casting

The Stress Concentration Mechanism of Pores Affecting the Tensile Properties in Vacuum Die Casting Metals

Finite element analysis for die casting parameters in high-pressure die casting process

Influence of Decreasing Speed Technology and Decreasing Pressure Technology on Quality and Properties of Magnesium Alloy Die Castings

Influence of Gas Flowrate on Filling Ability and Internal Quality of A356 Aluminum Alloy Castings Fabricated Using the Expendable Pattern Shell Casting with Vacuum and Low Pressure

Characteristics of Mold Filling and Entrainment of Oxide Film in Low Pressure Casting of A356 Alloy

Influence of Different High Pressure Die Casting Processes on 3D Porosity Distribution of Mg-3.0Nd-0.3Zn-0.6Zr Alloy

Optimization of the Synchronous Pressurization Process for the Elimination of Double-Layer Oxide Film Defects

Effect of Depressurizing Speed on Mold Filling Behavior and Entrainment of Oxide Film in Vacuum Suction Casting of A356 Alloy

Effect of Vacuum on Porosity and Mechanical Properties of High-Pressure Die-Cast Pure Copper

Effects of Hollow Sand Mold on the Microstructure and Mechanical Properties of a Low Pressure Aluminum Alloy Casting