Investigation of Properties in Magnesium Alloy Thin Plates after Die Casting Processes
Jun-Tae Han,Choong-Mo Ryu,Seung-Jae Moon
DOI: https://doi.org/10.3390/met14090970
IF: 2.695
2024-08-29
Metals
Abstract:This study systematically analyzed the effect of design conditions on filling behavior and product characteristics when forming thin plates of magnesium alloy (AZ91D) of 0.5 mm or less using the die casting method. As a research method, a casting analysis simulation program was used to predict filling and solidification behavior under various process conditions. The molten metal injection temperature (610~670 °C), mold temperature (160~220 °C), and cooling water temperature (10~55 °C) were selected as key variables, and an analysis was performed for a total of five conditions. A simulation was conducted to analyze the charging speed distribution, location of oxides and bubbles, and solidification pattern. As a result of the study, the flow of molten metal in the low and high-speed sections of the plunger, uniformity of product thickness, and supply conditions of the molten metal were confirmed to be major factors. It is important to manage the molten metal injection temperature at an appropriate level to minimize product defects. Based on these conditions, a prototype was manufactured, the microstructure was observed, and a fine and uniform grain structure was observed in most areas. In mechanical property evaluation, superior physical properties were secured compared to existing bulk materials.
materials science, multidisciplinary,metallurgy & metallurgical engineering