Abstract:The microstructure evolution and thermal stability of continuous SiC fiber-reinforced Ti60 (SiCf/Ti60) composites at elevated temperatures have not been reported. The objective of this study was to conduct thermal exposure experiments of SiCf/Ti60 composites at 400 degrees C / 100 h, 600 degrees C / 100 h, and 800 degrees C / 100 h. The aim was to compare the interfacial and matrix microstructures under hot isostatic pressure (HIP) conditions and to assess their thermal stability. The results show that SiCf/Ti60 composites have excellent long-term thermal stability at 600 degrees C thermal exposure, short-term thermal stability at 800 degrees C thermal exposure and the thickness of the reaction layer (RL) increases to 1.27 mu m. From HIP to 800 degrees C thermal exposure, RL changes from finegrained TiC II discontinuous silicides II coarse-grained TiC to fine-grained TiC II near-continuous silicides II medium-grained TiC II coarse-grained TiC. Large-sized beta-Ti and S2 silicides precipitated in the matrix at 800 degrees C thermal exposure, where beta-Ti and alpha-Ti followed the Burgers orientation relationship (BOR), and the S2 exhibited a multitude of orientation relationships with both beta-Ti and alpha-Ti. Furthermore, it was demonstrated that thermal exposure resulted in a reduction in the dislocation density of the matrix. In particular, thermal exposure at 800 degrees C led to a decrease in the dislocation density of the matrix by 47 %. This observation provided a novel approach for the reduction of crystal defects in the matrix and the enhancement of the properties of SiCf/Ti composites.

Mechanical properties of polycrystalline Ti3SiC2 at ambient and elevated temperatures

Synthesis and Mechanical Properties of In-Situ Hot-Pressed Ti3SiC2 Polycrystals

Reactive Synthesis of Polycrystalline Ti3AlC2 and Its Sintering Behavior

High Temperature Physical and Mechanical Properties of Large-Scale Ti2AlC Bulk Synthesized by Self-Propagating High Temperature Combustion Synthesis with Pseudo Hot Isostatic Pressing

Mechanical properties and microstructure evolution of 3D C f /SiBCN composites at elevated temperatures

Fabrication and Mechanical Properties of High-Pure Ti<sub>3</sub>SiC<sub>2</sub> Bulk Materials Directly by Hot-Pressing its Powder

Fabrication and mechanical properties of high-pure Ti3SiC 2 bulk materials directly by hot-pressing its powder

Insights into High‐Temperature Uniaxial Compression Deformation Behavior of Ti3AlC2

Compressive Properties of Ti 3AlC2 Ceramics Prepared by SHS/PHIP

Tensile behavior of the designed SiCf/Ti2AlNb/Ti17 composites

High-temperature Deformation Behavior of SiC-AlN Ceramic Alloys with Fine-grained Microstructure.

High-Temperature Strength of Sic-Aln Solid-Solutions and Composites As Evaluated by Small Punch Tests

Microstructural evolution, mechanical and thermal properties of TiC-ZrC-Cr3C2 composites

High-temperature Microstructure Evolution and Thermal Stability of SiCf/Ti60 Composites

Synthesis of High-Purity Ti3SiC2 Polycrystals by Hot-Pressing of the Elemental Powders

High-temperature tensile behavior of 3D SiC/SiC composites

MECHANICAL PROPERTIES OF TiC-Ni PRODUCED BY SHS AT ROOM AND HIGH TEMPERATURES

Dynamic response of Ti3SiC2 under shock compression up to 112 GPa

Ambient and Elevated Temperature Mechanical Properties of Hot-Pressed Fused Silica Matrix Composite

Microstructural evolution and silicide precipitation behavior of TiCp/near- titanium matrix composite during hot compression

Mechanical properties of short carbon fiber-reinforced TiC composites produced by hot pressing