Abstract:A novel composite with in situ synthesized of Ti2(Al,Si)C solid solution reinforced Al matrix was fabricated in Ti2AlC-Al-Si material system via one-step solid solution and densification by spark plasma sintering method. The relationship between microstructure, phase composition and mechanical properties of composites doped with different Si content (1, 2 and 3 wt%) and fabricated at different sintering temperature (580, 570 and 560 °C) were investigated. The optimal sintering temperature of composites with increasing the Si addition was carefully determined. The interface reaction was effectively regulated under different Si additions. X-ray photoelectron spectroscopy (XPS) and nanoindentation test results reveal that Si formed SiC covalent bond in Ti2(Al,Si)C solid solution, and with the increase of Si addition, the hardness and elastic modulus of Ti2(Al,Si)C increased by 6.75% and 4.23% in the composites prepared by the three optimal processes. The tensile tests show that when the addition of Si was 2 wt% and the sintering temperature was 570 °C, the composites demonstrated an optimal balance of strength and plasticity. The ultimate tensile strength reached 226 MPa with a strain of 14.33%. Moreover, when added to 3 wt% and the sintering temperature decreased to 560 °C, the composite achieved a significant improvement in elongation. The performance are mainly attributed to the strengthening of Ti2(Al,Si)C solid solution and the regulation of interface reaction.

Synthesis and Mechanical Properties of In-Situ Hot-Pressed Ti3SiC2 Polycrystals

Synthesis of High-Purity Ti3SiC2 Polycrystals by Hot-Pressing of the Elemental Powders

Enhanced Mechanical/electrical Properties of in Situ Synthesized SiC-TiB2 Ceramic Composites by Reactive Hot-Pressing Sintering

Synthesis and Properties of Ti<sub>3</sub>SiC<sub>2</sub>/SiC Ceramic Composites

Synthesis and Properties of Ti<sub>3</sub>SiC<sub>2</sub>/SiC Ceramic Composites

Mechanical properties of polycrystalline Ti3SiC2 at ambient and elevated temperatures

Microstructure characterization and mechanical properties of in situ synthesized Ti2(Al,Si)C reinforced Al composites

Processing, Microstructural Characterization and Mechanical Properties of in Situ Ti3AlC2/TiAl3 Composite by Hot Pressing

Fabrication and Mechanical Properties of High-Pure Ti<sub>3</sub>SiC<sub>2</sub> Bulk Materials Directly by Hot-Pressing its Powder

Preparation of Al2O3/Ti3SiC2 multilayer materials by in-situ synthesis

Microstructure and Mechanical Properties of Ti2AlC-reinforced TiAl Composites

Fabrication and mechanical properties of high-pure Ti3SiC 2 bulk materials directly by hot-pressing its powder

Fabrication of Al2O3–Ti3SiC2 Composites and Mechanical Properties Evaluation

Enhancement mechanical properties of in-situ preparated B4C-based composites with small amount of (Ti3SiC2+Si)

Preparation of Al<sub>2</sub>O<sub>3</sub>/TiSiC<sub>2</sub> Multilayer Materials by In-Situ Synthesis

High-performance Ti composites reinforced with in-situ TiC derived from pyrolysis of polycarbosilane

Microstructures and mechanical properties of in-situ SiC-TiB2 ceramic composites fabricated by reactive melt infiltration

Synthesis and mechanical properties of Ti 3 AlC 2 by spark plasma sintering

The study of mechanical properties of Ti3SiC2/Y TZP ceramics composites

Mechanical Properties and Microstructure of Al<sub>2</sub>O<sub>3</sub>-Ti<sub>3</sub>SiC<sub>2</sub> Ceramic Composites

Strengthening Ti3AlC2 by in Situ Synthesizing Ti3AlC2–Y4Al2O9 Composites

Synthesis and Mechanical Properties of In-Situ Hot-Pressed Ti3SiC2 Polycrystals

Synthesis of High-Purity Ti3SiC2 Polycrystals by Hot-Pressing of the Elemental Powders

Enhanced Mechanical/electrical Properties of in Situ Synthesized SiC-TiB2 Ceramic Composites by Reactive Hot-Pressing Sintering

Synthesis and Properties of Ti&lt;sub&gt;3&lt;/sub&gt;SiC&lt;sub&gt;2&lt;/sub&gt;/SiC Ceramic Composites

Synthesis and Properties of Ti<sub>3</sub>SiC<sub>2</sub>/SiC Ceramic Composites

Mechanical properties of polycrystalline Ti3SiC2 at ambient and elevated temperatures

Microstructure characterization and mechanical properties of in situ synthesized Ti2(Al,Si)C reinforced Al composites

Processing, Microstructural Characterization and Mechanical Properties of in Situ Ti3AlC2/TiAl3 Composite by Hot Pressing

Fabrication and Mechanical Properties of High-Pure Ti&lt;sub&gt;3&lt;/sub&gt;SiC&lt;sub&gt;2&lt;/sub&gt; Bulk Materials Directly by Hot-Pressing its Powder

Preparation of Al2O3/Ti3SiC2 multilayer materials by in-situ synthesis

Microstructure and Mechanical Properties of Ti2AlC-reinforced TiAl Composites

Fabrication and mechanical properties of high-pure Ti3SiC 2 bulk materials directly by hot-pressing its powder

Fabrication of Al2O3–Ti3SiC2 Composites and Mechanical Properties Evaluation

Enhancement mechanical properties of in-situ preparated B4C-based composites with small amount of (Ti3SiC2+Si)

Preparation of Al<sub>2</sub>O<sub>3</sub>/TiSiC<sub>2</sub> Multilayer Materials by In-Situ Synthesis

High-performance Ti composites reinforced with in-situ TiC derived from pyrolysis of polycarbosilane

Microstructures and mechanical properties of in-situ SiC-TiB2 ceramic composites fabricated by reactive melt infiltration

Synthesis and mechanical properties of Ti 3 AlC 2 by spark plasma sintering

The study of mechanical properties of Ti3SiC2/Y TZP ceramics composites

Mechanical Properties and Microstructure of Al<sub>2</sub>O<sub>3</sub>-Ti<sub>3</sub>SiC<sub>2</sub> Ceramic Composites

Strengthening Ti3AlC2 by in Situ Synthesizing Ti3AlC2–Y4Al2O9 Composites

Synthesis and Properties of Ti<sub>3</sub>SiC<sub>2</sub>/SiC Ceramic Composites

Fabrication and Mechanical Properties of High-Pure Ti<sub>3</sub>SiC<sub>2</sub> Bulk Materials Directly by Hot-Pressing its Powder