Abstract:Molybdenum silicides (Mo–Si) have attracted great interest owing to their good electrical conductivity, ultra-high melting point and well oxidation resistance. In this work, the controllable syntheses of Mo5Si3 and Mo3Si powders by silicothermic reduction of MoS2 in the presence of lime are studied for the first time. The internal mixture composed of MoS2 and Si is wrapped by sufficient CaO. After the reaction is finished, the synthesized molybdenum silicides can be easily separated from the desulfurization layer by peeling off the desulfurization product. The results show that Mo3Si and Mo5Si3 can be prepared at 1500 °C for the samples with the MoS2:Si molar ratio of 1:1.7 and 1:2.33, respectively. In addition, the results show that both SiS2 and SiS can be formed during the heating process. The thermodynamic analysis about the disproportionation reaction of SiS indicates that the existence of SiS2 depends on the partial pressure of SiS (P SiS) and temperature. Moreover, it is demonstrated that SiS2 is preferentially formed under low temperature conditions. As the temperature rises, it is much easier for SiS2 to react with Si to form SiS. Additionally, this work experimentally proves for the first time that SiS gas can directly reduce MoS2 to form MoSi2 and SiS2. Subsequently, the recovery of S in the desulfurization product was studied. S in MoS2 was first captured by CaO in the form of CaS (accompanied by Ca2SiO4 and Si). In order to solve this CaS containing desulfurization product which is detrimental to the environment, CaS in the desulfurization product is react with Fe2O3 and C to form FeS. This work provides new insights into the closed-loop capture and recovery of S in the process of extracting metals or metal compounds from sulfide ores.

Synthesis and analysis of high-purity MoSi2 powder

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

Preparation of Intermetallic Compound MoSi2 by Mechanical Alloying Method

Synthesis of Mo(Si, Al)2 Powders by Mechanical Alloying

Synthesis of Mosi2 by Mechanical Alloying

Studies of synthesizing the SiC nanometer powders by chemical vapor reaction

Synthesis of Mosi2/Wsi2 Nanocrystalline Powder by Mechanical-Assistant Combustion Synthesis Method

Synthesis of SiC/MoSi2 composite by mechanical alloying and reactive sintering

Mechanical Alloying and Thermodynamic Analysis of Mo-Si Binary

Characterization of Mo–Si–B Nanocomposite Powders Produced Using Mechanical Alloying and Powder Heat Treatment

Self-propagation high-temperature synthesis and casting of Cu–MoSi2 composite

Controllable syntheses of Mo5Si3 and Mo3Si by silicothermic reduction of MoS2 in the presence of lime

Synthesis of Silicon Carbide Nanopowder Using Silica Fume

Characterization of mechanochemical modification in SiC powder

Influence of Spark Plasma Sintering Temperature on Sintering Behavior and Microstructures of Dense Bulk MoSi2

Facile Synthesis of Ti3SiC2 Powder by High Energy Ball-Milling and Vacuum Pressureless Heat-Treating Process from Ti–TiC–SiC–Al Powder Mixtures

Structure evolution and thermodynamics analysis of MoSi2 during mechanical alloying

Preparation and Phase Analysis of Fe-SiAlON-MoSi<sub>2</sub> Composites

Synthesis of High Purity SiC Powder for High-resistivity SiC Single Crystals Growth

Mo-Si Compound Composites Synthesized by in Situ Reaction

Microstructure Evolution and Wear Properties of Bulk MoSi2 Fabricated by Field Activated Sintering