Abstract:To further clarify the effect mechanism of MoS 2 element diffusion on tribological properties of cemented carbide materials, an investigation was carried in this study. The diffusion process between cemented carbide inserts and MoS 2 powder under high temperature condition was carried out in a muffle furnace device. The surface morphology and chemical element content of test samples were observed and measured with scanning electron microscope, energy spectrum, and X-ray diffraction instruments. The kinetics of the diffusion process was quantitatively discussed by thermodynamic experiments. Tribological experiments were carried out using friction and wear machine with which the friction coefficient and wear scar were obtained. The experimental results show that high temperature has a significant effect on physical and mechanical properties of cemented carbide materials. Moreover, MoS 2 elements diffusion on sample surface is existed and induced by thermal action, which results in a further changing of material properties of cemented carbide. The WC grain growth is inhibited when molybdenum element is only infiltration on sample surface at 500 °C, which improves the surface morphology and hardness of test sample. However, the oxidation rate, friction coefficient, and wear rate of test sample are the highest when heating temperature larger than 500 °C. The main reason is that, as the temperature increasing, the diffusion of sulfur elements is occurred and intensified the loss of cobalt element on sample surface. So, the bonding ability of it is decreased due to the loss of bonding phase Co. Thus, the surface hardness and wear resistance of test sample is deteriorated. This study provides a theoretical foundation for the application of molybdenum disulfide in tool cutting lubrication condition.

Mechanosynthesis of molybdenum carbides by ball milling at room temperature

The Thermal Stability and Lubricity of Zinc Thiomolybdenate at Temperatures Up to 500°C

Microstructure and Mechanical Properties of Unalloyed Molybdenum Fabricated Via Wire Arc Additive Manufacturing

Mechanosynthesis Mechanism of Tic Powders

Study on the Structure and Formation Mechanism of Molybdenum Carbides

Amorphization in the AlC System by Mechanical Alloying

Reactive Synthesis for Porous (Mo2/3Y1/3)2AlC Ceramics through Mo, Y, Al and Graphite Powders

Ti2SnC MAX Phase Directly Synthesized by High-Temperature Ball Milling

Effect of carburising agent on the structure of molybdenum carbides

Synthesis and Characterization of Molybdenum Carbide Catalysts on Different Carbon Supports

A Novel Route to Nanosized Molybdenum Boride and Carbide And/Or Metallic Molybdenum by Thermo-Synthesis Method from Moo3, Kbh4, and Ccl4

Synthesis of nanocrystalline molybdenum carbide materials and their characterization

Formation Energetics and Guest—Host Interactions of Molybdenum Carbide Confined in Zeolite Y

Simple synthesis of ultrasmall β-Mo<sub>2</sub>C and α-MoC<sub>1−x</sub> nanoparticles and new insights into their catalytic mechanisms for dry reforming of methane

Effect of MoS 2 element diffusion under high temperature condition on the tribological properties of cemented carbide materials

Atomic-Scale Mechanism on Nucleation and Growth of Mo2c Nanoparticles Revealed by in Situ Transmission Electron Microscopy

Synthesis of Scroll‐Type Composite Microtubes of Mo2C/MoCO by Controlled Pyrolysis of Mo(CO)6

Room Temperature Ion Beam Synthesis of Ultra-Fine Molybdenum Carbide Nanoparticles: Toward a Scalable Fabrication Route for Earth-Abundant Electrodes

Thermodynamic Stability of Molybdenum Oxycarbides Formed from Orthorhombic Mo2C in Oxygen-rich Environments

Formation of Mo2C in molybdenum tubing inside a graphite furnace filled with pure nitrogen at high temperature

Preparation of Molybdenum Carbides Using Butane and Their Catalytic Performance