Abstract:Abstract The goal of the presented research was syntheses of the ultrafine and nanopowder blends by Mechanical Alloying from Fe-W-Al-Ti-Ni-B-C compositions for further application as a precursor for fabrication bulk High-Entropy Alloy (HEA) by explosive compaction technology. The presented paper describes the preliminary investigations of mechanical alloying of Fe-W-Al-Ti-Ni-B-C powders. Laboratory vibrating sieve equipment was used for sorting the initial powders for the reduction of particle size. For the experiments were used powders of Fe-W-Al-Ti-Ni-B-C system consisting of five major metallic and two minor non-metallic B and C elements were used for mechanical alloying. The crystalline coarse Aluminum, Titanium, Carbon and Nickel, fine-grained iron and tungsten and amorphous Boron powders were used as initial components. The Fe, W, Al, Ti and Ni powders were preliminary checked by “Explorer 5000 XRF” by Skyray instrument and verified. Based on the literature review, theoretical investigation and phase diagrams for mechanical alloying were selected two compositions with the following molar ratio: Fe 20 W 15 Al 15 Ti 20 Ni 20 B 5 C 5 ; Fe 25 W 25 Al 10 Ti 15 Ni 15 B 5 C 5 ; The mechanical alloying was realized on the high energy ball mill with zirconium oxide jars and balls. The ball to powder mass ratio was 10:1, the rotation speed was 500rpm. The process was carried out in dry conditions. The time of mechanical alloying was 5h, 10h and 14 h. The powders were prepared for preliminary analyses and assessment of particle size. The SEM and optical microscopy results of mechanical alloying are presented in the paper.

Synthesis of Ti3SiC2 Powder by Mechanical Alloying and Mechanical Property of the Sintered Compacts.

Preparation of Ti/Al based nanophase composite powder by mechanical alloying

Effect of Al Addition on Phase Purity of Ti3Si(Al)C2 Synthesized by Mechanical Alloying

Preparation of ti-al based nanophase composite powder by mechanical alloying

Effect of Sn and Si on the Synthesis of Ti<sub>3</sub>Al(Sn/Si)C<sub>2</sub> by Self-Propagating High-Temperature Sintering

Effect of Aluminum on Fabrication of Ti3SiC2 by Mechanical Alloying and Spark Plasma Sintering

Preparation of SiC-AlN Ceramic Alloy Powder by Direct Reaction Between Constituent Elements and Property Evaluation of Its Sintered Compacts.

Reaction Synthesis of Ti3SiC2 from Mixture of Elemental Powders

Amorphization in the AlC System by Mechanical Alloying

Synthesis of Mo(Si, Al)2 Powders by Mechanical Alloying

Synthesis Mechanism of Amorphous Si2BC3N Powders: Structural Evolution of 2si‐bn‐3c Mixtures During Mechanical Alloying

Synthesis of Ultrafine Fe-W-Al-Ti-Ni-C-B Powders by Mechanical Alloying

Synthesis of Ti<sub>3</sub>SiC<sub>2</sub> Bulk Materials with B<sub>2</sub>O<sub>3</sub> Additive

Synthesis of Fine Grain Ti3sic2 by Spark Plasma Sintering with Additive of Aluminum

Mechanical Alloying Synthesis and Spark Plasma Sintering Consolidation of Al-Ti-Si-W Alloys

Synthesis, characterization, and mechanical behavior of ultra-fine-grained Ti-6Al-5V alloy prepared by mechanical alloying and spark plasma sintering

Synthesis of SiC-AlN Ceramic Alloy Powder by the Direct Reactions Between the Constituent Elements.

Mechanical Alloying Synthesis and Spark Plasma Sintering of CoSb3

Mechanosynthesis Mechanism of Tic Powders

Microstructure characterization and mechanical properties of in situ synthesized Ti2(Al,Si)C reinforced Al composites