Abstract:Powder metallurgy generally is a preferred method to consolidate and prepare some refractory metals considering their high melting temperatures. However, sintering such materials to high density while maintaining fine grain structure is challenging, and generally require ultrahigh temperature or need to be assisted by external pressure. Especially, the preparation of nanostructured oxide dispersion strengthened (ODS) refractory metals at low temperature is more difficult because grain coarsening and densification are simultaneously hindered by the common oxide addition. Thus, it is of great sense to explore a kind of oxide that can be used as both strengthening phase and sintering accelerator. In this work, after extensive theoretical calculation and experimental observation, it is found that the accelerated sintering at low temperature can be achieved in W-HfO2 system. In the absence of external pressure or activator, this system can be rapidly densified without undesirable grain coarsening at a relative low temperature of only 1480 ˚C. Through kinetic analysis and density functional theory (DFT) calculation, it was confirmed that the intergranular HfO2 particles provide a rapid diffusion transport pathway for W atoms in support of densification at temperature of interest. As a result, this alloy exhibits a homogeneous microstructure with ∼97% relative density and ∼200 nm grain size, which renders our alloy with an ultrahigh compressive strength of ∼3 GPa, much higher than the reported values. We believe that the accelerated sintering mechanism found in our W-HfO2 system can be applicable to other refractory metals to prepare high-density nanocrystalline alloys with excellent properties.

Fabrication of High‐purity HfSi2 Powder Via Molten Salt‐assisted Magnesium Thermal Reduction

Fabrication of Y2O3-doped MgO Refractory Raw Materials Based on Magnesium Hydroxide from Salt-Lake Brine

High-Pressure and High-Temperature Synthesis and In Situ High-Pressure Synchrotron X-ray Diffraction Study of HfSi2

High-Pressure and High-Temperature Synthesis and In Situ High-Pressure Synchrotron X-ray Diffraction Study of HfSi 2

Super-gravity field assisted homogeneous distribution of sub-micron eutectic Si in Al-Si alloy

Polymer-derived SiHfN ceramics: From amorphous bulk ceramics with excellent mechanical properties to high temperature resistant ceramic nanocomposites

Precipitation of (Si2-Xalx)hf in an Al-Si-Mg-Hf Alloy.

Fabrication and Electrical Characteristics of Ultrathin (Hfo2)(x)(sio2)(1-X) Films by Surface Sol-Gel Method and Reaction-Anneal Treatment

Studies of synthesizing the SiC nanometer powders by chemical vapor reaction

Efficient Production of Mg2si in A Fluidized-Bed Reactor

Synthesis of Submicrometer HfB2 Powder and Its Densification

Fabrication of hypereutectic Al Si alloy with improved mechanical and thermal properties by hot extrusion

Preparation of silicon crystallites via controllable thermal reduction of amorphous silica

Low‐temperature molten salt synthesis of ultrafine high‐entropy rare‐earth silicate powders

Accelerated sintering of high-performance oxide dispersion strengthened alloy at low temperature

The Structure, Morphology and Magnetic Properties of Sr-ferrite Powder Prepared by the Molten-Salt Method

A low temperature MgH2-AlCl3-SiO2 system to synthesize nano-silicon for high-performance Li-ion batteries

A high entropy silicide by reactive spark plasma sintering

Molten salt synthesis of Ni 0.5Zn 0.5Fe 2O 4 ferrites

Effect of Rapid Heating and Cooling Conditions on Microstructure Formation in Powder Bed Fusion of Al-Si Hypoeutectic Alloy: A Phase-Field Study

A molten-salt route for synthesis of Si and Ge nanoparticles: chemical reduction of oxides by electrons solvated in salt melt