Abstract:The simultaneous doping of hafnium dioxide nanoparticles and metal‐organic framework (MOF) nanoparticles into the SiCN ceramic precursor enhances both the mechanical and electromagnetic wave absorption performance of the resulting SiCN ceramic. Polymer‐derived ceramics (PDCs) have become promising candidates for electromagnetic wave (EMW) absorption due to their high thermal stability, design flexibility, and versatile functionality. However, the inevitable porous structure formed during pyrolysis greatly limits its mechanical performance. In this work, Ni–Fe–C/HfO2/SiCN ceramic was prepared by simultaneously doping nickel and iron‐containing metal‐organic framework (Ni–Fe–MOF) nanoparticles and hafnium dioxide (HfO2) nanoparticles into the ceramic precursor, thereby improving its intrinsic brittle structure while granting it extraordinary EMW absorption performance. The flexural strength, flexural modulus, and Vickers hardness of Ni–Fe–C/HfO2/SiCN ceramic were 101.06 MPa, 40.19 GPa, and 13.31 GPa, respectively. These values were 1 132%, 749%, and 191% higher than those of the initial SiCN ceramics. In addition, by optimizing the content of Ni–Fe–MOF, the Ni–Fe–C/HfO2/SiCN ceramic demonstrated satisfying EMW absorption performance from 25°C to 500°C. At 25°C, the minimum reflection loss (RLmin) and effective absorption bandwidth (EAB) were −54.07 dB and 3.95 GHz, covering 94% of the X‐band at a thickness of 2.27 mm. At 500°C, the RLmin and EAB were −33.72 dB and 1.82 GHz, still covering 43% of the X‐band at a thickness of only 1.65 mm. This work provides valuable insight into the integration of mechanical and EMW absorbing functions of PDC materials.

Polymer-derived SiHfN ceramics: From amorphous bulk ceramics with excellent mechanical properties to high temperature resistant ceramic nanocomposites

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Phase evolution and oxidation resistance of Si3N4/HfB2/HfB C N1–– ceramic nanocomposites prepared from tailored preceramic polymers

Preparation of silicon-nitride ceramic fibers with hafnium compounds loaded on the surface and the high temperature properties

Low temperature sintering of Hf0.95Nb0.05B2-based ceramics with submicron-scaled grains and enhanced mechanical properties

Effect of SiC on the anti-ablation resistance and flexural strength of (Hf-Ta-Zr)C-C/C composites

Structural evolution and oxidation resistance of polysilazane‐derived SiCN‐HfO2 ceramics

Synthesis, microstructure and electromagnetic properties of Hf-based SiBCN ceramics

Sintering Behavior, Microstructure and Mechanical Properties of Various Fluorine-Containing Y-SiAlON Glass-Ceramics

High temperature ablation of hot pressed HfC‐SiC ceramics

Fabrication, Microstructural Evolution, and Mechanical Properties of SiC/(Hf0.25Ta0.25Zr0.25Nb0.25)C/C Nanocomposites

Low temperature fabrication of highly dense α‐Si3N4 ceramics

Non-additive sintering of Si2N2O ceramic with enhanced high-temperature strength, oxidation resistance, and dielectric properties

Fabrication and properties of Si2N2O-Si3N4 ceramics via direct ink writing and low-temperature sintering

Low‐temperature reactive hot‐pressing of Ta0.2Hf0.8C‐SiC ceramics at 1700°C

The Structure and Properties of the Promising Ultra-High-Temperature HfB2–HfC–SiC Ceramics Obtained from Heterophase SHS Powders

Synthesis and pyrolysis of Hf–N–B backbone polymer precursor for HfC/HfB 2 composite ceramics

Fabrication of Si 3 N 4 ceramics with high thermal conductivity and flexural strength via novel two-step gas-pressure sintering

Pressureless Sintering and High-Temperature Strength of SiC-AlN Ceramics

Advanced Fabrication Method and Mechanical Properties of Silicon Nitride/Boron Nitride Fibrous Monolithic Ceramics

Nanoparticles‐doped polymer‐derived SiCN ceramic with enhanced mechanical properties and electromagnetic wave absorption