Abstract:The current generation of ultrahigh temperature ceramic precursors typically encounters obstacles in achieving high ceramic yields ( < 40 wt.%) due to the challenges in integrating significant amounts of boron, which hampers their conversion into boride-based ultrahigh temperature ceramics. To tackle these challenges, a serious of pioneering liquid multi-component hafnium-containing ceramic SiHfCB precursors (with different Hf/Si ratios) have been developed. These novel precursors are featured with stable molecular structure and high ceramic yield which were successfully created through a novel one-pot polymerization process. They present in liquid form and their structure is characterized by C-C bonds forming its main chain with branched chains of O-Si-O, Si-O-Hf, Si-O-B, and B-O-Hf which have untapped advantages including uniform component dispersion, and excellent fluidity. The ceramic yield of SiHfCB precursor with Hf/Si of 0.2 is remarkably up to 68.6 wt.% at 1500 degrees C, and their Hf content exceeded 50 wt.%. Of particular interest, the pyrolyzed product HfB2 -SiC nanopowders derived from the SiHfCB precursor with Hf/Si of 0.2, consist of nanopowders in the 40-60 nm range with a density of 5.23 g cm(-4). Remarkably, this material demonstrates exceptional performance in ultrahigh temperature oxygen-containing environments at 2500 degrees C, showing near-zero ablation with a linear ablation rate of just 2.5 x 10(-4) mm s(-1) . Post-ablation analysis of the microstructure reveals that the formation of a lava-like HfO2 and HfO2 -SiO2 oxide layer effectively blocks oxygen penetration and provides excellent oxidation resistance. The innovative SiHfCB hafnium-containing ceramic precursor offers a groundbreaking solution for the preparation of lightweight ultrahigh-temperature ceramics. This development is poised to provide robust technical support for the use of ultrahigh temperature ceramics in non-ablative thermal protective systems, particularly in the construction of hypersonic vehicles, where ultrahigh temperature resilience is crucial. (c) 2024 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Structural evolution and oxidation resistance of polysilazane‐derived SiCN‐HfO2 ceramics

Phase evolution and oxidation resistance of Si3N4/HfB2/HfB C N1–– ceramic nanocomposites prepared from tailored preceramic polymers

Polymer-derived SiHfN ceramics: From amorphous bulk ceramics with excellent mechanical properties to high temperature resistant ceramic nanocomposites

Enhanced high-temperature oxidation resistance of HfSi 2 -modified silicon based multilayer ceramic coating on Nb alloy prepared by a novel strategy

Synthesis, microstructure and electromagnetic properties of Hf-based SiBCN ceramics

Effect of Hf and B Incorporation on the SiOC Precursor Architecture and High-Temperature Oxidation Behavior of SiHfBOC Ceramics

Oxidation/ablation behaviors of hafnium carbide-silicon carbonitride systems at 1500 and 2500 C

Oxidation Resistance and Microstructural Analysis of Polymer‐Derived (HfxTa1‐x)C/SiC Ceramic Nanocomposites

Enhanced High-Temperature Oxidation Resistance of HfSi2-modified Silicon Based Multilayer Ceramic Coating on Nb Alloy Prepared by a Novel Strategy

Structural Evolutions and Oxidation Behavior of Fe-doped Silicon Oxycarbide Nanocomposites at Medium Temperatures

Single-source-precursor synthesis of dense monolithic SiC/(Ti0.25Zr0.25Hf0.25Ta0.25)C ceramic nanocomposite with excellent high-temperature oxidation resistance

Nanoparticles‐doped polymer‐derived SiCN ceramic with enhanced mechanical properties and electromagnetic wave absorption

Preparation of silicon-nitride ceramic fibers with hafnium compounds loaded on the surface and the high temperature properties

Polymer derived SiBCN(O) ceramics with tunable element content

Polymer‐Derived Ceramic Coatings with Excellent Thermal Cycling Stability

Ultrahigh Temperature Ablation Resistant HfB2-SiC Composites: from Liquid SiHfCB Precursor Synthesis to Light Weight Bulk Preparation and Characterization

HfB 2 -SiC ceramics fabricated by reactive melt infiltration and its long-term oxidation behavior at 1650°C

High-temperature stability and oxidation behavior of SiOC/HfO2 ceramic nanocomposite in air

Effect of SiC on the anti-ablation resistance and flexural strength of (Hf-Ta-Zr)C-C/C composites

High‐purity Stoichiometric Si3N4 Ceramics through Trimethylsilyl‐substituted Polysilazanes

Structure and Energetics of SiOC and SiOC‐modified Carbon‐bonded Carbon Fiber Composites