Abstract:Resin-bonded Al–Si–SiC composite was sintered in the air, and the oxidation mechanism was investigated utilizing industrial CT, XRD, and SEM, combined with thermodynamic calculations, as well as a reaction model, was established. The generation of Al4C3 is avoided by constructing the Al-Sialloy(l) intermediate phase. Simultaneously, AlN exists as a solid solution, which improves the stability of the composite. With temperature increasing, the antioxidant properties of the Al–Si–SiC composite are enhanced by forming a dense layer, and the oxidation mechanism varies at different temperatures. At 1100 °C, the outer layer of Al and Si oxidized to generate Al2O3 and SiO2, respectively, while the inner layer generated irregular granular AlN–SiC solid solution; At 1300 °C, the outer pores were filled densely with Al2O3 and SiO2, while the high temperature and low Po2/Pθ induced active oxidation of SiC in the inner layer so that Po2/Pθ was further reduced and the AlN–SiC solid solution particles grew up; At 1500 °C, Al-Sialloy(l) rapidly seals the outer pore channels, accompanied by the in-situ formation of mullite and dense layers, where only N2(g) is free to diffuse inward, followed by the continuous dissolution of C and N in a form of atoms in the Al-Sialloy(l) to generate hexagonal granular AlN–SiC solid solution.

High-temperature stability and oxidation behavior of SiOC/HfO2 ceramic nanocomposite in air

Microstructure and oxidation behavior of SiOC coatings on C/C composites co-deposited with HMDS and TEOS by using CVD process

HfB 2 -SiC ceramics fabricated by reactive melt infiltration and its long-term oxidation behavior at 1650°C

Experimental and first-principles simulation study on oxidation behavior at 1700 °C of Lu2O3–SiC-HfB2 ternary coating for SiC coated carbon/carbon composites

Solid‐Solution Effects on the High‐Temperature Oxidation Behavior of Polymer‐Derived (Hf,Ta)C/SiC and (Hf,Ti)C/SiC Ceramic Nanocomposites

Oxidation Resistance and Microstructural Analysis of Polymer‐Derived (HfxTa1‐x)C/SiC Ceramic Nanocomposites

Single-source-precursor synthesis of dense monolithic SiC/(Ti0.25Zr0.25Hf0.25Ta0.25)C ceramic nanocomposite with excellent high-temperature oxidation resistance

Preparation of MoSi2-modified HfB2-SiC ultra high temperature ceramic anti-oxidation coatings by liquid phase sintering

Investigation of the oxidation mechanism of Si-Al2O3-fused mullite containing Ti2O3 composite

Structural Evolutions and Oxidation Behavior of Fe-doped Silicon Oxycarbide Nanocomposites at Medium Temperatures

High Temperature Oxidation Resistance Of Ti3sic2 In Air And Low Oxygen Atmosphere

Phase evolution and oxidation resistance of Si3N4/HfB2/HfB C N1–– ceramic nanocomposites prepared from tailored preceramic polymers

Isothermal Oxidation of Zr2[Al(Si)]4C5–SiC Composites at 1000–1300°C in Air

Wet oxidation behavior of C/SiC–SiHf(B)CN composites at high temperature

Effect of HF and NaOH Etching on Chemical and Structure Stability of Hollow SiOC Ceramics

Oxidation behavior of SiC‐AlN ceramics exposed to dry oxygen and water oxygen environments at 1100–1300°C

Oxidation Behavior of Ternary Carbide Ceramics in Hf–Al–C System in Air

Oxidation mechanism of Al–Si–SiC composite at elevated temperature

Oxidation Behavior of SiC/SiC Composites in Air at High Temperature

The oxidation resistance mechanism of SiC-B4C-xAl2O3 ceramics at 1400 °C in air atmosphere

Oxidation resistance of SiCf/SiC composites with a PyC/SiC multilayer interface at 500 °C to 1100°C