Abstract:This paper explores a low standby power 10T (LP10T) SRAM cell with high read stability and write-ability (RSNM/WSNM/WM). The proposed LP10T SRAM cell uses a strong cross-coupled structure consisting standard inverter with a stacked transistor and Schmitt-trigger inverter with a double-length pull-up transistor. This along with the read path separated from true internal storage nodes eliminates the read-disturbance. Furthermore, it performs its write operation in pseudo differential form through write bitline and control signal with a write-assist technique. To estimate the proposed LP10T SRAM cell’s performance, it is compared with some state-of-the-art SRAM cells using HSPICE in 16-nm CMOS predictive technology model at 0.7 V supply voltage under harsh manufacturing process, voltage, and temperature variations. The proposed SRAM cell offers 4.65X/1.57X/1.46X improvement in RSNM/WSNM/WM and 4.40X/1.69X narrower spread in RSNM/WM compared to the conventional 6T SRAM cell. Furthermore, it shows 1.26X/1.08X/1.01X higher RSNM/WSNM/WM and 1.71X/1.25X tighter/wider spread in RSNM/WM compared to the best studied SRAM cells. The proposed SRAM cell indicates 74.48%/1.41% higher/lower read/write delay compared to the 6T SRAM cell. Moreover, it exhibits the third-(second-) best read (write) dynamic power, consuming 29.69% (26.87%) lower than the 6T SRAM cell. The leakage power is minimized by the proposed design, which is 37.35% and 12.08% lower than that of the 6T and best studied cells, respectively. Nonetheless, the proposed LP10T SRAM cell occupies 1.313X higher area compared to the 6T SRAM cell.

An Area-Efficient Dual Replica-Bitline Delay Technique For Process-Variation-Tolerant Low Voltage Sram Sense Amplifier Timing

A 512 Kb SRAM in 65nm CMOS with Divided Bitline and Novel Two-Stage Sensing Technique

A High-Performance Wordline Voltage-Generating System for Low-Power Low-Voltage Flash Memory

Bit-Interleaving-Enabled 8t Sram with Shared Data-Aware Write and Reference-Based Sense Amplifier

-Memory Computing Based Reliable and High Speed Schmitt trigger 10T SRAM cell design

Novel 15T SRAM Cell for Low Voltage High Reliability Application

A Low-Power Variation-Tolerant 7T SRAM With Enhanced Read Sensing Margin for Voltage Scaling

A near-threshold SRAM design with transient negative bit-line voltage scheme

Re-synthesis for Cost-Efficient Circuit-Level Timing Speculation

Low-Power High-Yield Sram Design With Vss Adaptive Boosting And Bl Capacitance Variation Sensing

A Variation-Tolerant Near-Threshold Processor with Instruction-Level Error Correction

Features Non-Volatile Processor : Circuit , System , and Software

DSC-TRCP: Dynamically Self-Calibrating Tunable Replica Critical Paths Based Timing Monitoring for Variation Resilient Circuits

A universal delay line circuit for variation resilient IC with self-calibrated time-to-digital converter

Performance Improvements by SL-Current Limiter and Novel Programming Methods on 16MB RRAM Chip

A 140-mV Variation-Tolerant Deep Sub-Threshold SRAM in 65-nm CMOS.

A Single Bitline Highly Stable, Low Power With High Speed Half-Select Disturb Free 11T SRAM Cell

A systematic design methodology for yield-driven near-threshold SRAM design

A Reliable Low Standby Power 10T SRAM Cell With Expanded Static Noise Margins

Methods to Realize Low-BER and High-Reliability RRAM Chip With Fast Page-Forming Capability

Yield Driven Design and Optimization for Near Threshold Voltage Sram Cells